2.5HP Electric Direct Portable Air Compressor

The Huada HD0301 is a 1.8kW (3 HP) single-cylinder direct-connect air-cooled piston air compressor featuring a motor-to-pump direct coupling design that eliminates the traditional belt drive system. With ultra-compact dimensions of just 70×31×58 cm and a featherweight of only 32 kg—paired with a 35 L air receiver and 0.8 MPa working pressure—it stands out as one of the most compact and lightweight machines in its class. It is ideally suited for precision applications such as dental clinic air supply, laboratory instrumentation, small-scale electronics spraying, and model-making airbrushing where space efficiency and quiet operation matter.

The Huada HD0302(A) is a 2.2 kW (3 HP) dual-cylinder direct-connect air-cooled piston air compressor featuring a parallel twin-cylinder design where two 42 mm cylinders work in tandem to deliver a generous 0.20 m³/min displacement. Paired with a 30 L air receiver and 0.8 MPa (116 psi) working pressure, it can pressurize the tank from zero to rated pressure in approximately 90 seconds. The direct-coupled drive eliminates belt-slip losses, delivering superior mechanical efficiency over traditional belt-driven units. It is widely used in auto detailing and quick-repair shops for tire inflation, small bodywork pneumatic tool operation, finish carpentry nailer supply, wall spray painting, and other multi-tool simultaneous-operation scenarios.

The 45 kW models in the TVD+ series feature a twin-screw drive unit paired with an IE5 permanent magnet motor, delivering ultra-high energy efficiency at this power level. Specifically designed for ensuring stable gas supply in large-scale industrial production lines, as well as in the chemical and energy sectors.

With a 90 kW drive and 19.8 m³/min at 0.8 MPa, the HUADA New A LGGPM-125 addresses higher-flow plant air requirements. Two-stage compression and VSD control help align output with the operating load.

The Yiluma SV-10+ features a 7.5 kW permanent magnet variable-frequency unit with a maximum air delivery capacity of 1.20 m³/min (0.7 MPa). Its compact design delivers noise levels as low as 60 ± 2 dB, making it the ideal air supply solution for small workshops, automotive repair shops, and light manufacturing applications.

The Yiluma SV-10 10HP single-stage permanent magnet VFD screw air compressor delivers 1.1 m³/min at 0.8 MPa in a compact 160 kg package, making it an ideal compressed air solution for small workshops and light manufacturing. Its direct-drive PM motor and intelligent controller combine energy efficiency with simple, reliable operation.

The HUADA HS3608 is a 3 kW single-stage, belt-driven piston air compressor rated at 0.36 m³/min with a 105 L receiver. Its wheeled horizontal layout gives workshops, repair bays and job sites a practical air source for impact tools, spray work and general maintenance.

 The HS4808 features a dual-cylinder 90 mm × 2 cast iron pump head paired with a 4 kW all-copper motor, offering an exhaust capacity of 0.48 m³/min and a large 120 L air reservoir, providing stable and cost-effective compressed air for small to medium-sized auto repair shops, metalworking facilities, and assembly lines.