PRODUCTS
Products
Home /Rotary Screw Air Compressors /Variable-Speed Screw Compressors /

SV Series

/YILUMA SV-20 15 kW Single-Stage PM VSD Screw Air Compressor

YILUMA SV-20 15 kW Single-Stage PM VSD Screw Air Compressor

YILUMA SV-20 is a 15 kW single-stage permanent magnet variable-speed screw air compressor for industrial air supply. It delivers 2.35 m³/min at 0.8 MPa and 2.0 m³/min at 1.0 MPa. The air-cooled package measures 1100 × 730 × 1050 mm, weighs 290 kg and uses a G3/4 air outlet.


  • Item NO.:

    SV-20
  • Product Origin:

    Quanzhou, Fujian, China
  • Color:

    Dark gray cabinet with yellow branding
  • Product weight:

    290 kg
  • Shipping Port:

    Xiamen
  • Lead Time:

    Depends on configuration
Share To :
New Products
  • Product Details


SV-20 at a glance

The YILUMA SV-20 is a 15 kW cabinet package for changing workshop air demand, designed for assembly workshops, repair facilities and grouped pneumatic workstations. Its oil-injected single-stage compressor uses permanent magnet variable-speed control to respond to changing air demand, with air cooling and an enclosed cabinet.

The 15 kW unit delivers 2.35 m³/min at 0.8 MPa and 2.0 m³/min at 1.0 MPa. Package dimensions are 1100 × 730 × 1050 mm, weight is 290 kg and the air outlet is G3/4. The specified electrical supply is 380 V, three-phase, 50 Hz. Select receivers and downstream treatment to suit the air network.

01   Product advantages

1. 15 kW capacity with separate pressure ratings
The SV-20 provides 2.35 m³/min at 0.8 MPa and 2.0 m³/min at 1.0 MPa. Use the delivery at the required pressure when assessing assembly workshops, repair facilities and grouped pneumatic workstations and sizing the connected air system.

2. Permanent magnet variable-speed motor
The permanent magnet motor and inverter work together to adjust compressor operation as consumption changes. Motor-temperature monitoring supports protection during operation. Review pressure settings and the actual load profile when assessing energy use.

3. Vector control and variable-frequency starting
The inverter follows pressure demand and regulates motor operation, with variable-frequency starting. Demand-based flow control helps coordinate compressor output with workshop consumption; actual performance depends on the selected duty and system layout.

4. Controller with operating and protection functions
The controller displays operating information and supports self-diagnosis and protective functions for conditions such as overload and abnormal voltage. Confirm any communication or remote-monitoring configuration required for the installation during quotation.

5. Axial fan cooling and lower air inlets
The cabinet uses an axial cooling fan with lower air inlets and a top ventilation path. Keep the airflow routes clear and provide ventilation that carries waste heat away from the compressor area.

6. Intake filtration and three-stage oil separation
Intake and oil filters support the compression system. Oil separation combines centrifugal, gravity and filtration stages. The lubricating oil quantity is 5 L; specify downstream treatment separately for the required process air quality.

7. Installation values for a complete layout review
The 1100 × 730 × 1050 mm package weighs 290 kg and has a G3/4 outlet. Check handling access, operating space, ventilation and the distribution connection before locating the compressor within a shared plant air network.

YILUMA SV-20 15 kW single-stage PM VSD screw air compressor, dark gray cabinet with yellow branding

YILUMA SV-20 · 15 kW · Single-stage PM VSD screw compressor

02   Technical specifications

Parameter SV-20
Model SV-20
Compressor type Oil-injected single-stage PM VSD screw compressor
Motor power 15 kW
Air delivery at 0.8 MPa 2.35 m³/min
Air delivery at 1.0 MPa 2.0 m³/min
Starting method Variable-frequency starting
Cooling method Air cooling
Discharge temperature ≤ Ambient temperature + 15°C
Power supply 380 V / 3-phase / 50 Hz
Lubricating oil quantity 5 L
Dimensions (L × W × H) 1100 × 730 × 1050 mm
Unit weight 290 kg
Air outlet G3/4
Product origin Quanzhou, Fujian, China

Delivery values apply to the stated pressure points and the selected 380 V, three-phase, 50 Hz configuration. Receiver, dryer, filters and any communication or remote-monitoring options are specified separately in the quotation. Confirm the complete system requirements before ordering.

03   Check the fit for your site

Demand at the operating pressure: Compare simultaneous consumption with 2.35 m³/min at 0.8 MPa or 2.0 m³/min at 1.0 MPa. Include peak demand, operating hours and distribution losses.

Electrical supply: The specified configuration uses 380 V, three-phase, 50 Hz. Provide site electrical details and confirm any required supply variation before ordering.

Handling and ventilation: Plan for the 1100 × 730 × 1050 mm package and 290 kg unit weight. Allow access for maintenance and an unobstructed cooling-air route at the lower inlets and top ventilation area.

Air treatment and connection: Use the G3/4 outlet as the starting point for connection planning. Size receivers, dryers and filters for the selected duty, process air quality and total pressure-loss allowance.

04   Purchasing information

Before you order What to confirm

Quotation requirements

Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination.

Equipment scope

The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included.

Delivery and shipment

Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination.

Technical documentation

Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration.

Warranty and after-sales support

Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents.

05   Manufacturing and documentation

Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.

HUADA compressor assembly testing area screw compressor workshop and warehouse

View our factory
Review qualification documents

06   Frequently asked questions

What is the SV-20 delivery at 1.0 MPa?

The SV-20 delivers 2.0 m³/min at 1.0 MPa and 2.35 m³/min at 0.8 MPa. Its lubricating oil quantity is 5 L, its dimensions are 1100 × 730 × 1050 mm and its weight is 290 kg. Use the delivery value at the actual operating pressure when sizing the system.

Is this a standalone compressor or a complete air-treatment station?

This page describes the standalone SV cabinet compressor. Receiver, refrigerated dryer, downstream filters and drains are selected separately unless included in the agreed quotation. Specify the required outlet air quality and operating conditions so that the complete air system can be matched to the process.

How does permanent magnet variable-speed control respond to demand?

The controller and inverter adjust motor operation in response to pressure demand. This allows output to follow changes in consumption within the configured operating limits. Any energy-use assessment should use the actual pressure, load profile and operating hours rather than a fixed savings percentage.

Can the compressor be connected to remote monitoring?

Communication and remote-monitoring requirements can be reviewed for the selected control configuration. State the required monitoring functions when requesting a quotation so that the necessary hardware, connectivity, service scope and availability can be confirmed for the destination.

07  Request a Quotation for SV-20

Contact us to specify the YILUMA SV-20 for your air system. Send the required operating pressure, average and peak air consumption, site power supply and operating hours so that we can review the selected 15 kW configuration.

Include the required outlet air quality, installation conditions, order quantity and destination. We will confirm the equipment scope, technical configuration, delivery arrangements and quotation for your application.

Request a Quote



Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
YILUMA SV-30 22 kW single-stage PM VSD screw air compressor, dark gray cabinet with yellow branding YILUMA SV-30 22 kW Single-Stage PM VSD Screw Air Compressor

YILUMA SV-30 is a 22 kW single-stage permanent magnet variable-speed screw air compressor for industrial air supply. It delivers 3.4 m³/min at 0.8 MPa and 2.95 m³/min at 1.0 MPa. The air-cooled package measures 1200 × 900 × 1220 mm, weighs 310 kg and uses a G1 air outlet.

Yiluma SV-50 37 kW 50 HP energy-saving PM VSD screw air compressor YILUMA SV-50 37 kW Single-Stage PM VSD Screw Air Compressor

YILUMA SV-50 is a 37 kW single-stage permanent magnet variable-speed screw air compressor for industrial air supply. It delivers 6.3 m³/min at 0.8 MPa and 5.4 m³/min at 1.0 MPa. The air-cooled package measures 1350 × 1000 × 1330 mm, weighs 450 kg and uses a G1 1/4 air outlet.

YILUMA SV-150 110 kW single-stage PM VSD screw air compressor, orange cabinet panels with dark gray frame and trim YILUMA SV-150 110 kW Single-Stage PM VSD Screw Air Compressor

YILUMA SV-150 is a 110 kW single-stage permanent magnet variable-speed screw air compressor for industrial air supply. It delivers 20.0 m³/min at 0.8 MPa and 15.5 m³/min at 1.0 MPa. The air-cooled package measures 2500 × 1470 × 1950 mm, weighs 1840 kg and uses a DN80 air outlet.

Huada HDAD series refrigerated dryer 0.50kw Huada HDAD series refrigerated dryer

The evaporator and heat exchange device are combined to design cooling precipitation and reheating method to remove moisture from compressed air, which has the characteristics of low operating cost and high reliability. The high-efficiency and energy-saving environmentally friendly refrigerant compressor, air-cooled condenser and environmentally friendly refrigerant are used. The whole machine is energy-saving and environmentally friendly. It is the preferred equipment for compressed air use occasions with a pressure dew point of more than 3°C!

HUADA SED-200+ 160 kW two-stage PM VSD screw air compressor with gray with orange trim HUADA SED-200+ 160 kW Air-Cooled Two-Stage Permanent Magnet VSD Screw Air Compressor

The HUADA SED-200+ is an air-cooled SED+ series screw air compressor delivering 33.6 m³/min at 0.8 MPa from a 160 kW motor. The 160 kW model combines an IE5 permanent magnet motor, dual VFD control and a DN80 outlet for a high-demand central compressed-air system.

Huada HDW750-24D 0.75kW 1HP ultra quiet oil-free silent air compressor 50dB 24L tank for airbrush painting - studio grade clean air machine 1HP Ultra Quiet Air Compressor For Airbrush

The Huada HDW750-24D is a 0.75 kW (1 HP) oil-free silent direct-drive air compressor purpose-built for fine-detail applications such as art airbrushing, model making, and electronic coating that require steady continuous air supply. Featuring a 100% copper-wire motor, electromagnetic unloading valve, and high-efficiency aluminum radiator, it operates at ≤50 dB with clean oil-free output. The 24 L tank ensures stable pressure delivery—an ideal air supply unit for studios and maker spaces.

HUADA TPK-20A 2.6 m³/min fixed-frequency refrigerated compressed air dryer in orange and dark gray HUADA TPK-20A 2.6 m³/min Fixed-frequency Refrigerated Air Dryer

The HUADA TPK-20A is a fixed-frequency refrigerated compressed air dryer with a nominal treatment capacity of 2.6 m³/min. It combines air-to-air heat recovery, refrigerated moisture condensation and automatic condensate drainage in an orange and dark gray cabinet. Supply: 220 V / 50 Hz; air connection: G1.

HUADA HDU450 oil-free twin-screw vacuum pump 45kW 2450m3/h for food packaging and pharmaceutical applications HDU450 Oil-Free Double-Screw Vacuum Pump

The HDU450 employs oil-free twin-screw compression technology, achieving an ultimate vacuum of up to 300 mbar (absolute pressure) and a rated pumping rate of 2,450 m³/h; it is suitable for medium-load vacuum systems in applications requiring high gas cleanliness levels, such as food packaging, pharmaceutical freeze-drying, electronics and semiconductor manufacturing, and photovoltaic laminating.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact