what are you looking for?
The Blue Storm M2.0-30 is an air-cooled permanent magnet VSD screw compressor with 22 kW motor power and an air-delivery range of 3.7–3.1 m³/min over 0.7–1.0 MPa. The 22 kW package combines a MAXTOP airend, IE4 permanent magnet motor and connected control functions in an upright cabinet with a 1-inch outlet.
Item NO.:
M2.0-30Product Origin:
Quanzhou, Fujian, ChinaColor:
Blue with light gray front panelsProduct weight:
340 kgShipping Port:
XiamenLead Time:
Depends on configuration
The Blue Storm M2.0-30 is a 22 kW permanent magnet inverter screw compressor for production cells and workshop air networks. A MAXTOP airend and coaxial direct drive form the core of the package. Air delivery is 3.7–3.1 m³/min over the 0.7–1.0 MPa pressure range.
The 800 × 780 × 1590 mm cabinet has a net weight of 340 kg and a 1-inch outlet. Use these model-specific dimensions and connections when planning an equipment-room upgrade, and review compressor capacity at the required working pressure.
1. 22 kW capacity for production-cell air demand
The M2.0-30 has a 22 kW motor and an air-delivery range of 3.7–3.1 m³/min over 0.7–1.0 MPa. Match the selected pressure configuration to production equipment, air-treatment capacity and distribution losses.
2. IE4 PM motor with coaxial direct transmission
The 22 kW permanent magnet motor is rated IE4 and connects directly to the MAXTOP screw airend. The coaxial layout provides a compact drive arrangement for the upright compressor package.
3. Integrated inverter with variable-frequency starting
The integrated inverter regulates motor speed in response to changing air demand and provides variable-frequency starting. Its built-in DC reactor and centralized control arrangement help reduce electrical interference.
4. Operating-data visibility for the production team
The microcomputer controller displays operating parameters and provides fault alarms and protective shutdown. The IoT system supports remote data monitoring, and RS-485 communication supports linked control. Define the required monitoring and communication configuration before system integration.
5. Separated drive and cooling zones
The air-cooled package uses an optimized airflow path with separation of the drive and cooling zones. Provide an unobstructed inlet and hot-air discharge route for the 22 kW installation.
6. Oil filtration and circulation pressure management
The M2.0-30 has a specified lubricating-oil quantity of 10 L. A spin-on oil filter, temperature-control valve and minimum-pressure valve support the oil circuit, oil circulation and prevention of reverse airflow.
7. 340 kg cabinet with a 63 dB(A) noise specification
The cabinet measures 800 × 780 × 1590 mm, has a net weight of 340 kg and a noise specification of 63 dB(A). Obtain the installation layout before finalizing the delivery route and service clearances. Assess workplace sound levels under the actual installation conditions.
Blue Storm M2.0-30 22 kW permanent magnet VSD screw air compressor, shown in blue with light gray front panels.
| Parameter | M2.0-30 |
|---|---|
| Model | M2.0-30 |
| Compressor type | Oil-injected PM VSD screw compressor |
| Motor power | 22 kW |
| Motor efficiency class | IE4 permanent magnet motor |
| Discharge pressure | 0.7–1.0 MPa |
| Air delivery at 0.7–1.0 MPa | 3.7–3.1 m³/min |
| Drive arrangement | Direct drive |
| Starting method | Variable-frequency starting |
| Cooling method | Air cooling |
| Discharge temperature | < Ambient temperature + 15°C |
| Power supply | 380 V / 50 Hz |
| Lubricating oil quantity | 10 L |
| Noise level | 63 dB(A) |
| Dimensions (L × W × H) | 800 × 780 × 1590 mm |
| Net weight | 340 kg |
| Air outlet size | 1 inch |
| Airend | MAXTOP screw airend |
| Product origin | Quanzhou, Fujian, China |
The air-delivery range corresponds to the stated discharge-pressure range; it is not a VSD minimum-to-maximum flow modulation range. Confirm output at the selected working pressure and the supplied electrical and connection configuration. Compare noise levels under equivalent measurement conditions.
Pressure and demand: For a production cell or workshop network with substantial combined air consumption, provide average and peak consumption, operating hours and the pressure required at the point of use. The specified capacity is 3.7–3.1 m³/min over 0.7–1.0 MPa.
Electrical and cooling provision: The motor power is 22 kW and the specified supply is 380 V / 50 Hz. Coordinate electrical capacity and ventilation with the planned operating hours and downstream air-treatment equipment.
Handling and connections: Allow for the 800 × 780 × 1590 mm cabinet, 340 kg net weight and 1-inch outlet. Use the 1-inch outlet and 340 kg net weight when planning connections, unloading and positioning.
Air quality and site conditions: Select the receiver, dryer and filters for the required moisture, particulate and oil limits. Provide actual ambient temperature, humidity and dust conditions so that ventilation and maintenance requirements can be reviewed.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
How should the M2.0-30 pressure and airflow range be read?
The specified discharge-pressure range is 0.7–1.0 MPa, with a corresponding air-delivery range of 3.7–3.1 m³/min. This describes pressure-dependent capacity, not the minimum-to-maximum flow modulation range of the VSD. Confirm the output at your selected working pressure when requesting a quotation.
What dimensions, weight and outlet apply to the M2.0-30?
The M2.0-30 measures 800 × 780 × 1590 mm (L × W × H), has a net weight of 340 kg and uses a 1-inch outlet. Confirm the mating connection and required service clearances when preparing the installation layout.
Can the maintenance team monitor operating data remotely?
The IoT system supports remote monitoring of compressor operating data. Confirm communication equipment, network availability and the enabled functions for the supplied configuration.
What electrical information is needed before ordering?
The specified supply is 380 V / 50 Hz. Provide the actual site voltage, frequency, phase arrangement and available electrical capacity so the supplied electrical configuration can be confirmed.
07 Request a Quotation for M2.0-30
Request a quotation for the M2.0-30 with your required working pressure, average and peak air demand, operating hours, available power supply, quantity and destination.
Provide the production duty, available electrical supply, 1-inch connection layout and required monitoring interfaces.
Leave A Message
Medium Pressure Permanent Magnetic Frequency Conversion Screw Air Compressor
Energy Saving of huada medium pressure permanent magnet frequency conversion screw air compressor can reach 35%.
Huada LGPM-30 22kW Permanent Magnet Servo Screw Air Compressor
The Huada LGPM-30 is a 22kW permanent magnet servo screw compressor with NdFeB magnets and a direct-drive split structure, offering stable pressure and ~40% energy savings under frequent start-stop duty.
Huada LGPM-50 37kW High-Efficiency Permanent Magnet Servo Screw Air Compressor
The Huada LGPM-50 is an A-series 37kW high-efficiency PM servo screw compressor with low noise and intelligent constant-pressure supply, ideal for medium plants.
Huada LGPM-20 15kW Permanent Magnet VSD Screw Air Compressor
The Huada LGPM-20 uses an IE4 permanent magnet motor with IP54 totally-enclosed protection, delivering 35–45% energy savings at 15kW for lines demanding safety and efficiency.
Huada LGPM-10 Energy Saving Screw Air Compressor
The Huada LGPM-10 is a 7.5kW (10hp) permanent magnet VSD screw air compressor built for small workshops and light-duty air demand, saving about 40% energy versus conventional models.
100HPSED series PM two-stage VSD Screw Air Compressor
Permanent magnet use high-srength NdFeB (neodymium iron boron) magnetic steel, high magnetic energyproduct and coercivity of NdFeB magnetic steel, make rare-earth permanent magnet motor have small size , lightweight , high ffient, good character etc, a series of advantages.
175HPSED series PM two-stage VSD Screw Air Compressor
Permanent magnet use high-srength NdFeB (neodymium iron boron) magnetic steel, high magnetic energyproduct and coercivity of NdFeB magnetic steel, make rare-earth permanent magnet motor have small size , lightweight , high ffient, good character etc, a series of advantages.
LGPM-30 permanent magnet variable frequency screw air compressor
Air compressors are the "power tigers" in industrial electricity consumption, with an average power consumption of 20%. How to use the same amount of electricity to produce more air and help users save energy? We have made a series of efforts and research, and have made important breakthroughs. The permanent magnet variable frequency screw compressor developed by the company saves about 40% of electricity for users while ensuring the original working efficiency.
IPv6 network supported
English
français
Deutsch
русский
español
português
日本語
한국의
ไทย
中文
