what are you looking for?
The Blue Storm M2.0-50 is an air-cooled permanent magnet VSD screw compressor with 37 kW motor power and an air-delivery range of 6.1–5.2 m³/min over 0.7–1.0 MPa. An IE4 permanent magnet motor, direct-drive MAXTOP airend and 1-1/4-inch outlet support production networks requiring more air than the smaller M2.0 models.
Item NO.:
M2.0-50Product Origin:
Quanzhou, Fujian, ChinaColor:
Blue with light gray front panelsProduct weight:
500 kgShipping Port:
XiamenLead Time:
Depends on configuration
The Blue Storm M2.0-50 combines a 37 kW permanent magnet motor with a direct-drive MAXTOP airend for production networks with higher air consumption. Variable-speed control adjusts motor speed as demand changes through the operating cycle. Air delivery is 6.1–5.2 m³/min over the 0.7–1.0 MPa pressure range.
The package has a 1-1/4-inch outlet, a 900 × 878 × 1740 mm cabinet and a net weight of 500 kg. Review compressor capacity, treatment equipment, piping losses and installation access together when expanding the air system.
1. 37 kW output for a higher-demand production network
The M2.0-50 has a 37 kW motor and an air-delivery range of 6.1–5.2 m³/min over 0.7–1.0 MPa. Use this pressure-dependent range to assess supply capacity alongside dryers, filters, receivers and distribution pipework.
2. 37 kW IE4 permanent magnet motor and MAXTOP airend
The 37 kW permanent magnet motor is rated IE4 and drives the MAXTOP screw airend through a coaxial direct connection. The arrangement combines the series drive architecture with the larger capacity of the M2.0-50.
3. Variable-speed response to changing plant demand
The integrated inverter adjusts motor speed and provides variable-frequency starting. A DC reactor and centralized control arrangement help reduce electrical interference. Assess energy use against the actual pressure, operating schedule and load profile.
4. Operating protection and connected control
The microcomputer controller provides operating-parameter display, fault alarms and protective shutdown. RS-485 communication supports linked control, and the IoT system supports remote operating-data checks. Confirm the required control interfaces and network configuration for the plant.
5. Air cooling for the 37 kW package
An optimized airflow path and separated drive and cooling zones form the cooling arrangement. Plan fresh-air intake and hot-air discharge for the equipment room, including the heat load from other installed machinery.
6. 16 L lubrication system with spin-on filtration
The specified lubricating-oil quantity is 16 L. A spin-on oil filter and temperature-control valve serve the oil circuit. The minimum-pressure valve maintains the pressure needed for oil circulation and helps prevent reverse airflow.
7. Installation data for a 500 kg compressor package
The cabinet measures 900 × 878 × 1740 mm, has a net weight of 500 kg and a noise specification of 65 dB(A). Confirm unloading access, floor support, ventilation and service clearances before positioning the unit. Compare noise data under equivalent measurement conditions.
Blue Storm M2.0-50 37 kW permanent magnet VSD screw air compressor, shown in blue with light gray front panels.
| Parameter | M2.0-50 |
|---|---|
| Model | M2.0-50 |
| Compressor type | Oil-injected PM VSD screw compressor |
| Motor power | 37 kW |
| Motor efficiency class | IE4 permanent magnet motor |
| Discharge pressure | 0.7–1.0 MPa |
| Air delivery at 0.7–1.0 MPa | 6.1–5.2 m³/min |
| Drive arrangement | Direct drive |
| Starting method | Variable-frequency starting |
| Cooling method | Air cooling |
| Discharge temperature | < Ambient temperature + 15°C |
| Power supply | 380 V / 50 Hz |
| Lubricating oil quantity | 16 L |
| Noise level | 65 dB(A) |
| Dimensions (L × W × H) | 900 × 878 × 1740 mm |
| Net weight | 500 kg |
| Air outlet size | 1-1/4 inch |
| Airend | MAXTOP screw airend |
| Product origin | Quanzhou, Fujian, China |
The air-delivery range corresponds to the stated discharge-pressure range; it is not a VSD minimum-to-maximum flow modulation range. Confirm output at the selected working pressure and the supplied electrical and connection configuration. Compare noise levels under equivalent measurement conditions.
Pressure and demand: For a production network with higher total air consumption and changing operating loads, provide average and peak consumption, operating hours and the pressure required at the point of use. The specified capacity is 6.1–5.2 m³/min over 0.7–1.0 MPa.
Electrical and cooling provision: The motor power is 37 kW and the specified supply is 380 V / 50 Hz. Review supply capacity and equipment-room ventilation for the 37 kW package and the other machines in the station.
Handling and connections: Allow for the 900 × 878 × 1740 mm cabinet, 500 kg net weight and 1-1/4-inch outlet. Check the 1-1/4-inch outlet, mating connection and pipe sizing against the required airflow and acceptable pressure drop.
Air quality and site conditions: Select the receiver, dryer and filters for the required moisture, particulate and oil limits. Provide actual ambient temperature, humidity and dust conditions so that ventilation and maintenance requirements can be reviewed.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
How should the M2.0-50 pressure and airflow range be read?
The specified discharge-pressure range is 0.7–1.0 MPa, with a corresponding air-delivery range of 6.1–5.2 m³/min. This describes pressure-dependent capacity, not the minimum-to-maximum flow modulation range of the VSD. Confirm the output at your selected working pressure when requesting a quotation.
What outlet connection is specified for the M2.0-50?
The outlet size is 1-1/4 inch. Confirm the connection form and mating fitting with the supplied configuration before ordering pipework. Size the distribution line for the required airflow, pressure and allowable pressure loss.
What noise level should be used when planning the installation?
The M2.0-50 noise specification is 65 dB(A). This is model-specific and should be compared using equivalent measurement conditions. Room surfaces, distance and ventilation openings affect the sound level at a work area.
Will variable-speed control deliver the same savings at every site?
The inverter adjusts motor speed as air demand changes. Actual energy savings depend on the load profile, operating pressure, running hours, system losses and the compressor used for comparison. Assess savings against measured site demand.
07 Request a Quotation for M2.0-50
Request a quotation for the M2.0-50 with your required working pressure, average and peak air demand, operating hours, available power supply, quantity and destination.
Include the site demand profile, operating hours, existing compressor arrangement and capacities of the treatment and distribution system.
Leave A Message
Medium Pressure Permanent Magnetic Frequency Conversion Screw Air Compressor
Energy Saving of huada medium pressure permanent magnet frequency conversion screw air compressor can reach 35%.
Huada LGPM-30 22kW Permanent Magnet Servo Screw Air Compressor
The Huada LGPM-30 is a 22kW permanent magnet servo screw compressor with NdFeB magnets and a direct-drive split structure, offering stable pressure and ~40% energy savings under frequent start-stop duty.
Huada LGPM-50 37kW High-Efficiency Permanent Magnet Servo Screw Air Compressor
The Huada LGPM-50 is an A-series 37kW high-efficiency PM servo screw compressor with low noise and intelligent constant-pressure supply, ideal for medium plants.
Huada LGPM-20 15kW Permanent Magnet VSD Screw Air Compressor
The Huada LGPM-20 uses an IE4 permanent magnet motor with IP54 totally-enclosed protection, delivering 35–45% energy savings at 15kW for lines demanding safety and efficiency.
Huada LGPM-10 Energy Saving Screw Air Compressor
The Huada LGPM-10 is a 7.5kW (10hp) permanent magnet VSD screw air compressor built for small workshops and light-duty air demand, saving about 40% energy versus conventional models.
100HPSED series PM two-stage VSD Screw Air Compressor
Permanent magnet use high-srength NdFeB (neodymium iron boron) magnetic steel, high magnetic energyproduct and coercivity of NdFeB magnetic steel, make rare-earth permanent magnet motor have small size , lightweight , high ffient, good character etc, a series of advantages.
175HPSED series PM two-stage VSD Screw Air Compressor
Permanent magnet use high-srength NdFeB (neodymium iron boron) magnetic steel, high magnetic energyproduct and coercivity of NdFeB magnetic steel, make rare-earth permanent magnet motor have small size , lightweight , high ffient, good character etc, a series of advantages.
LGPM-30 permanent magnet variable frequency screw air compressor
Air compressors are the "power tigers" in industrial electricity consumption, with an average power consumption of 20%. How to use the same amount of electricity to produce more air and help users save energy? We have made a series of efforts and research, and have made important breakthroughs. The permanent magnet variable frequency screw compressor developed by the company saves about 40% of electricity for users while ensuring the original working efficiency.
IPv6 network supported
English
français
Deutsch
русский
español
português
日本語
한국의
ไทย
中文
