Item NO.:
LGGPM-75+Product Origin:
Quanzhou, Fujian, ChinaColor:
Orange enclosure with dark gray panels and baseProduct weight:
2185 kgShipping Port:
XiamenLead Time:
Depends on configurationThe HUADA LGGPM-75+ is a 55 kW A+ Series oil-injected, two-stage permanent magnet VSD screw air compressor for dedicated production areas and factory workshop air networks. The design combines an IE5 oil-cooled motor, direct drive and variable-frequency starting in an enclosed industrial package with accessible maintenance doors.
Air-delivery values are 12.1 m³/min for the 0.6–0.8 MPa configuration, 9.6 m³/min for 0.6–1.0 MPa and 8.6 m³/min for 0.6–1.3 MPa. Rated pressure is 0.7 MPa. The package measures 2190 × 1610 × 2077 mm, weighs 2185 kg and uses a DN65 air outlet. Select the pressure configuration and duty point together with the required receiver, dryer and filtration equipment.
1. 55 kW capacity with configuration-specific delivery
The LGGPM-75+ provides 12.1 m³/min for the 0.6–0.8 MPa configuration, 9.6 m³/min for 0.6–1.0 MPa and 8.6 m³/min for 0.6–1.3 MPa. Use the value for the selected pressure-range configuration when reviewing average and peak plant demand, and confirm the exact operating duty point for the installation.
2. Two-stage compression with a low-speed airend design
The compression system divides the pressure rise between two stages. A large-rotor, low-speed airend design supports efficient compression for industrial air supply. Permanent magnet variable-speed control allows output to respond to changing system demand.
3. IE5 oil-cooled motor with IP65 motor protection
The 55 kW permanent magnet motor uses oil cooling and has IP65 motor protection. The motor-speed specification is 1500 rpm. Direct drive provides a straightforward transmission path between the motor and compression assembly.
4. Variable-speed cooling and enlarged heat exchangers
The cooling system combines enlarged heat-exchange surfaces with a variable-speed centrifugal fan. Plan a clear cooling-air inlet and hot-air discharge route, and keep the heat exchangers accessible for inspection and cleaning.
5. Oil separation with a 54 L lubricating oil quantity
The oil-injected system uses compound oil-air separation and an enlarged oil circuit. The lubricating oil quantity for the LGGPM-75+ is 54 L. Select downstream air treatment according to the required process air quality.
6. DN65 outlet and defined installation dimensions
This model is a 55 kW package with a DN65 outlet for a dedicated production-area air station. The cabinet dimensions are 2190 × 1610 × 2077 mm and unit weight is 2185 kg. Use these figures to plan delivery access, handling and the air-station layout, then allow additional space for cooling airflow and servicing.
7. Maintenance doors and accessible local controls
Full-opening maintenance doors provide access to service components. The enclosed cabinet uses acoustic insulation and sealing, while the front controller and emergency-stop control support local operation. The noise specification for the LGGPM-75+ is 78 ± 2 dB(A).
HUADA LGGPM-75+ · A+ Series · Two-stage PM VSD screw compressor
| Parameter | LGGPM-75+ |
|---|---|
| Model | LGGPM-75+ |
| Compressor type | Oil-injected two-stage PM VSD screw compressor |
| Motor power | 55 kW |
| Motor efficiency class | IE5 permanent magnet motor |
| Motor protection / cooling | IP65 / oil-cooled motor |
| Rated pressure | 0.7 MPa |
| Air delivery — 0.6–0.8 MPa configuration | 12.1 m³/min |
| Air delivery — 0.6–1.0 MPa configuration | 9.6 m³/min |
| Air delivery — 0.6–1.3 MPa configuration | 8.6 m³/min |
| Drive arrangement | Direct drive |
| Starting method | Variable-frequency starting |
| Motor speed | 1500 rpm |
| Cooling system | Enlarged heat exchangers; variable-speed centrifugal fan |
| Discharge temperature | Ambient temperature ± 15°C |
| Power supply | 380–400 V / 50 Hz |
| Lubricating oil quantity | 54 L |
| Noise level | 78 ± 2 dB(A) |
| Dimensions (L × W × H) | 2190 × 1610 × 2077 mm |
| Unit weight | 2185 kg |
| Air outlet | DN65 |
| Product origin | Quanzhou, Fujian, China |
Air-delivery values correspond to the three pressure-range configurations shown. They are configuration-specific delivery values; confirm the required operating duty point when ordering. The motor-speed entry is a specification reference. Confirm the site voltage, phase and frequency for the selected motor and inverter configuration.
Pressure and air demand: For dedicated production areas and factory workshop air networks, provide average and peak consumption, operating hours and pressure losses to the point of use. Select one of the 0.6–0.8, 0.6–1.0 or 0.6–1.3 MPa configurations and confirm its delivery at the intended operating pressure.
Power and cooling provision: Check the 55 kW motor requirement against the site electrical capacity. The specified supply is 380–400 V / 50 Hz; confirm the phase arrangement and connection requirements. Provide unobstructed cooling airflow and a suitable hot-air discharge route.
Handling and connections: Plan for the 2190 × 1610 × 2077 mm cabinet, 2185 kg unit weight and DN65 air outlet. Obtain the installation drawing and confirm handling access, a suitable foundation and the required service and ventilation clearances.
Air quality and installation conditions: Specify receivers, drying, filtration and condensate management for the process. Include ambient conditions, altitude, humidity and dust exposure when requesting a quotation so that the proposed configuration can be reviewed for the site.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
How should I interpret the three LGGPM-75+ air-delivery values?
The values are 12.1 m³/min for the 0.6–0.8 MPa configuration, 9.6 m³/min for 0.6–1.0 MPa and 8.6 m³/min for 0.6–1.3 MPa. They correspond to different pressure-range configurations. Specify the required operating pressure and confirm the applicable delivery when selecting the unit. Rated pressure is 0.7 MPa.
What motor and electrical configuration does the LGGPM-75+ use?
The LGGPM-75+ uses a 55 kW IE5 oil-cooled permanent magnet motor with IP65 motor protection, direct drive and variable-frequency starting. The motor-speed specification is 1500 rpm and the power supply is 380–400 V / 50 Hz. Confirm the site phase arrangement and selected motor and inverter configuration when ordering.
What space and outlet connection should I allow for?
The LGGPM-75+ measures 2190 × 1610 × 2077 mm, weighs 2185 kg and has a DN65 air outlet. Allow additional space for delivery and handling, opening the maintenance doors, cooling airflow and servicing. Plan receiver and air-treatment space as part of the complete station layout.
Does the compressor package include a receiver and refrigerated dryer?
The specifications describe the compressor package. Identify the receiver, dryer, filters and other accessories required for the application so that their inclusion can be confirmed in the quotation. Select air treatment for the required outlet air quality and provide suitable condensate drainage.
07 Request a Quotation for LGGPM-75+
Request a quotation for the HUADA LGGPM-75+ 55 kW A+ Series compressor. Send the required pressure configuration, average and peak air demand, operating hours, available power supply, order quantity and destination.
Include the available floor space, installation conditions and required outlet air quality. We will review the compressor configuration, receiver and treatment scope, delivery arrangements and quotation for your application.
Leave A Message