what are you looking for?
The HUADA Yiluma SV-30+ is an air-cooled SV+ series screw air compressor delivering 3.40 m³/min at 0.8 MPa from a 22 kW motor. The 22 kW package combines an IE4 permanent magnet motor, direct drive and a G1 outlet for a production-cell or workshop air network.
Item NO.:
SV-30+Product Origin:
Quanzhou, Fujian, ChinaColor:
Orange with dark gray panels and baseProduct weight:
300 kgShipping Port:
XiamenLead Time:
Depends on configuration
The SV-30+ provides permanent magnet VSD screw compression in the 22 kW power class for production cells and workshop networks requiring a larger local air supply. Air delivery is 3.40 m³/min at 0.8 MPa, with a G1 outlet and a unit size of 1200 × 900 × 1220 mm.
Use the selected pressure point to review compressor capacity alongside treatment equipment and distribution losses. Check access, floor support and ventilation before positioning the cabinet in the equipment room.
1. 22 kW output for a production-cell air network
The SV-30+ delivers 3.40 m³/min at 0.8 MPa with a 22 kW motor. Use the selected operating pressure to assess supply to production equipment and the associated air-treatment system.
2. Direct-drive IE4 permanent magnet motor
The 22 kW IE4 permanent magnet motor drives the screw airend through direct transmission. Variable-frequency starting and speed regulation support a supply that responds to changes in production demand.
3. Touchscreen operation with integrated speed control
The touchscreen displays operating parameters, and the integrated VSD controls motor speed. RS-485 communication supports the control arrangement; specify the required interface before integrating the compressor with plant monitoring.
4. External oil separation in the 22 kW package
The SV-30+ uses an external oil-separator element with intake and oil filtration. The specified lubricating-oil quantity is 7 L. Maintain the filters, separator and lubricant according to the supplied instructions and operating environment.
5. Axial fan air cooling
An axial cooling fan serves the air-cooled package, with cooling operation responding to temperature. Provide adequate inlet air and a hot-air discharge route for the 22 kW installation.
6. Cabinet, handling and acoustic data for site planning
The unit measures 1200 × 900 × 1220 mm, weighs 300 kg and has a noise specification of 75 ± 2 dB(A). Acoustic insulation, cabinet seals and rubber vibration-control components support noise and vibration management. Obtain the installation drawing before finalizing access and service clearances.
7. Operating visibility for the maintenance team
HUADA Smart Cloud supports remote operating-data checks, abnormal-condition warnings and service reminders. Confirm communication hardware, network access and enabled monitoring functions with the order configuration.
HUADA Yiluma SV-30+ 22 kW permanent magnet VSD screw air compressor, shown in orange with dark gray panels and base.
| Parameter | SV-30+ |
|---|---|
| Model | SV-30+ |
| Compressor type | Oil-injected PM VSD screw compressor |
| Motor power | 22 kW |
| Motor efficiency class | IE4 permanent magnet motor |
| Air delivery at 0.7 MPa | 3.45 m³/min |
| Air delivery at 0.8 MPa | 3.40 m³/min |
| Air delivery at 1.0 MPa | 2.95 m³/min |
| Drive arrangement | Direct drive |
| Starting method | Variable-frequency starting |
| Cooling method | Air cooling; axial fan |
| Discharge temperature | Ambient temperature ± 15°C |
| Power supply | 380 V / 3-phase / 50 Hz |
| Lubricating oil quantity | 7 L |
| Noise level | 75 ± 2 dB(A) |
| Dimensions (L × W × H) | 1200 × 900 × 1220 mm |
| Unit weight | 300 kg |
| Air outlet | G1 |
| Oil separator arrangement | External separator element |
| Product origin | Quanzhou, Fujian, China |
Air-delivery values correspond to the individual pressure points shown; they are not a VSD minimum-to-maximum flow range. Confirm the required pressure configuration and site conditions when ordering. Compare noise levels under equivalent measurement conditions.
Pressure and demand: For a production-cell or workshop network with higher combined air consumption, provide average and peak consumption, operating hours and the required pressure at the point of use. Use 3.40 m³/min for the 0.8 MPa duty point.
Electrical and cooling provision: The motor power is 22 kW and the power supply is 380 V / 3-phase / 50 Hz. Plan electrical capacity, cooling-air intake and hot-air exhaust routing together with the downstream treatment equipment.
Handling and connections: Allow for the 1200 × 900 × 1220 mm cabinet, 300 kg unit weight and G1 outlet. Review the G1 connection, delivery route and floor support before finalizing the equipment-room layout.
Air quality and site conditions: Select the receiver, dryer and filters for the required moisture, particulate and oil limits. Provide the actual ambient temperature, humidity and dust conditions so the installation and maintenance requirements can be reviewed.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
What airflow does the SV-30+ provide at different pressures?
Air delivery is 3.45 m³/min at 0.7 MPa, 3.40 m³/min at 0.8 MPa and 2.95 m³/min at 1.0 MPa. Specify the required pressure configuration when requesting a quotation.
What dimensions and weight should be used for delivery planning?
The SV-30+ measures 1200 × 900 × 1220 mm (L × W × H) and weighs 300 kg. Allow additional service and ventilation space, and confirm unloading arrangements, access openings and floor support before delivery.
What noise level should I use when planning the installation?
The SV-30+ noise specification is 75 ± 2 dB(A). Distance, room surfaces, ventilation openings and measurement conditions affect the sound level at a work area, so compare equipment under equivalent conditions.
Does the IE4 rating describe the complete compressor?
IE4 is the efficiency class of the permanent magnet motor. Evaluate the complete compressor at the required pressure and airflow, together with the actual demand profile and downstream pressure losses.
07 Request a Quotation for SV-30+
Request a quotation for the SV-30+ with your required pressure, average and peak air demand, operating hours, available power supply, quantity and destination.
Provide the G1 connection layout, delivery access, ventilation conditions and required process-air quality.
Leave A Message
Medium Pressure Permanent Magnetic Frequency Conversion Screw Air Compressor
Energy Saving of huada medium pressure permanent magnet frequency conversion screw air compressor can reach 35%.
Huada LGPM-30 22kW Permanent Magnet Servo Screw Air Compressor
The Huada LGPM-30 is a 22kW permanent magnet servo screw compressor with NdFeB magnets and a direct-drive split structure, offering stable pressure and ~40% energy savings under frequent start-stop duty.
Huada LGPM-50 37kW High-Efficiency Permanent Magnet Servo Screw Air Compressor
The Huada LGPM-50 is an A-series 37kW high-efficiency PM servo screw compressor with low noise and intelligent constant-pressure supply, ideal for medium plants.
Huada LGPM-20 15kW Permanent Magnet VSD Screw Air Compressor
The Huada LGPM-20 uses an IE4 permanent magnet motor with IP54 totally-enclosed protection, delivering 35–45% energy savings at 15kW for lines demanding safety and efficiency.
Huada LGPM-10 Energy Saving Screw Air Compressor
The Huada LGPM-10 is a 7.5kW (10hp) permanent magnet VSD screw air compressor built for small workshops and light-duty air demand, saving about 40% energy versus conventional models.
100HPSED series PM two-stage VSD Screw Air Compressor
Permanent magnet use high-srength NdFeB (neodymium iron boron) magnetic steel, high magnetic energyproduct and coercivity of NdFeB magnetic steel, make rare-earth permanent magnet motor have small size , lightweight , high ffient, good character etc, a series of advantages.
175HPSED series PM two-stage VSD Screw Air Compressor
Permanent magnet use high-srength NdFeB (neodymium iron boron) magnetic steel, high magnetic energyproduct and coercivity of NdFeB magnetic steel, make rare-earth permanent magnet motor have small size , lightweight , high ffient, good character etc, a series of advantages.
LGPM-30 permanent magnet variable frequency screw air compressor
Air compressors are the "power tigers" in industrial electricity consumption, with an average power consumption of 20%. How to use the same amount of electricity to produce more air and help users save energy? We have made a series of efforts and research, and have made important breakthroughs. The permanent magnet variable frequency screw compressor developed by the company saves about 40% of electricity for users while ensuring the original working efficiency.
IPv6 network supported
English
français
Deutsch
русский
español
português
日本語
한국의
ไทย
中文
