Yiluma Single Stage Energy Saving Screw Air Compressor

11 KW screw air compressor using IP54 motor, more safe, more efficient, more energy saving. Screw type air compressor adopts high wind volume heat dissipation structure, which greatly prolongs the service life of the machine.

Yiluma single stage energy saving screw air compressor adopts a heat dissipation structure with high air volume.The machine is easy to install,easy to operate,and has a long service life.

Yiluma single stage energy saving screw air compressor adopts a heat dissipation structure with high air volume.The machine is easy to install,easy to operate,and has a long service life.

The SC energy-saving series screw machine achieves first level energy efficiency, with inherent reliability, energy saving, and quietness in operation. The overall design is simple and can adapt to various working environments, meeting the gas needs of various industries.

The Huada HDW550-10D is a 0.55 kW oil-free silent direct-drive air compressor powered by a 100% copper-wire motor. It requires no lubrication, operates at an ultra-low noise level of ≤48 dB, and delivers clean, dry, oil-free compressed air. With its compact lightweight design (only 19 kg) and 10 L tank, it is ideally suited for small-to-medium dental clinics, dental laboratories, precision electronics work, and small-scale model airbrushing where air purity is critical.

The Huada HD0302(A) is a 2.2 kW (3 HP) dual-cylinder direct-connect air-cooled piston air compressor featuring a parallel twin-cylinder design where two 42 mm cylinders work in tandem to deliver a generous 0.20 m³/min displacement. Paired with a 30 L air receiver and 0.8 MPa (116 psi) working pressure, it can pressurize the tank from zero to rated pressure in approximately 90 seconds. The direct-coupled drive eliminates belt-slip losses, delivering superior mechanical efficiency over traditional belt-driven units. It is widely used in auto detailing and quick-repair shops for tire inflation, small bodywork pneumatic tool operation, finish carpentry nailer supply, wall spray painting, and other multi-tool simultaneous-operation scenarios.

The HD-22S is an entry-level single-stage permanent magnet variable-frequency screw compressor from the INNOVATE 2.0 series, delivering a power output of 22 kW and a flow rate of 3.7 m³/min, with a stable air supply at 0.8 MPa. Equipped with an IE5 ultra-efficient permanent magnet motor and a German-engineered main unit, it operates at a noise level as low as 72 ± 3 dB, making it ideal for small-to-medium-scale applications such as manufacturing, food packaging, and textile industries.

The Huada SG-20 is powered by a 15 kW single-stage permanent magnet variable-frequency drive, featuring a maximum discharge capacity of 2.4 m³/min (at 0.7 MPa), offering both stable output and a compact design; it is ideal for continuous gas application scenarios in small-to-medium manufacturing, architectural decoration, and automotive repair and bodywork.