what are you looking for?
The Blue Storm M2.0-10 is an air-cooled permanent magnet VSD screw compressor with 7.5 kW motor power and an air-delivery range of 1.4–1.1 m³/min over 0.7–1.0 MPa. Its IE4 permanent magnet motor, MAXTOP airend and compact upright cabinet suit a workshop air system with changing demand.
Item NO.:
M2.0-10Product Origin:
Quanzhou, Fujian, ChinaColor:
Blue with light gray front panelsProduct weight:
180 kgShipping Port:
XiamenLead Time:
Depends on configuration
The Blue Storm M2.0-10 combines a 7.5 kW permanent magnet motor with direct drive and variable-speed control in a compact upright cabinet. It is a practical option for a local air supply serving workshop tools and small production equipment. Air delivery is 1.4–1.1 m³/min over the 0.7–1.0 MPa pressure range.
A 680 × 610 mm cabinet footprint helps with equipment-room planning where floor space is limited. Review simultaneous tool consumption and operating pressure, then select the receiver, dryer and filters for the required air quality.
1. 7.5 kW capacity for a compact workshop air supply
The M2.0-10 has a 7.5 kW motor and an air-delivery range of 1.4–1.1 m³/min over 0.7–1.0 MPa. Use this pressure-dependent capacity range when assessing a local tool network and its receiver and air-treatment requirements.
2. IE4 permanent magnet motor with a MAXTOP airend
The 7.5 kW permanent magnet motor and MAXTOP screw airend use a coaxial direct-drive arrangement. This compact drive layout combines motor efficiency with a direct mechanical connection to the compressor airend.
3. Integrated variable-speed drive for changing tool demand
The integrated inverter adjusts motor speed as air demand changes and provides variable-frequency starting. A built-in DC reactor and centralized control layout help reduce electrical interference within the drive arrangement.
4. Operating display, protection and connected monitoring
The microcomputer controller displays operating parameters and provides fault alarms and protective shutdown. RS-485 communication supports linked control, while the IoT system supports remote operating-data checks. Confirm the communication equipment and network requirements for the supplied configuration.
5. Air cooling with separated thermal zones
The air-cooled cabinet combines an optimized airflow path with separation of the drive and cooling zones. Provide clear intake and hot-air discharge routes when positioning the compressor in a small equipment room.
6. Serviceable oil filtration and pressure control
A spin-on oil filter and temperature-control valve support the lubricating-oil circuit. The minimum-pressure valve maintains the pressure needed for oil circulation and helps prevent reverse airflow. The specified lubricating-oil quantity is 5 L.
7. Compact cabinet with a 60 dB(A) noise specification
The cabinet measures 680 × 610 × 1255 mm, has a net weight of 180 kg and a noise specification of 60 dB(A). Allow additional space for ventilation and service access around the cabinet. Actual sound levels at the operator position depend on installation and measurement conditions.
Blue Storm M2.0-10 7.5 kW permanent magnet VSD screw air compressor, shown in blue with light gray front panels.
| Parameter | M2.0-10 |
|---|---|
| Model | M2.0-10 |
| Compressor type | Oil-injected PM VSD screw compressor |
| Motor power | 7.5 kW |
| Motor efficiency class | IE4 permanent magnet motor |
| Discharge pressure | 0.7–1.0 MPa |
| Air delivery at 0.7–1.0 MPa | 1.4–1.1 m³/min |
| Drive arrangement | Direct drive |
| Starting method | Variable-frequency starting |
| Cooling method | Air cooling |
| Discharge temperature | < Ambient temperature + 15°C |
| Power supply | 380 V / 50 Hz |
| Lubricating oil quantity | 5 L |
| Noise level | 60 dB(A) |
| Dimensions (L × W × H) | 680 × 610 × 1255 mm |
| Net weight | 180 kg |
| Air outlet size | 3/4 inch |
| Airend | MAXTOP screw airend |
| Product origin | Quanzhou, Fujian, China |
The air-delivery range corresponds to the stated discharge-pressure range; it is not a VSD minimum-to-maximum flow modulation range. Confirm output at the selected working pressure and the supplied electrical and connection configuration. Compare noise levels under equivalent measurement conditions.
Pressure and demand: For a small workshop or a dedicated air supply for individual machines, provide average and peak consumption, operating hours and the pressure required at the point of use. The specified capacity is 1.4–1.1 m³/min over 0.7–1.0 MPa.
Electrical and cooling provision: The motor power is 7.5 kW and the specified supply is 380 V / 50 Hz. Plan the electrical connection and cooling-air route before allocating the workshop position.
Handling and connections: Allow for the 680 × 610 × 1255 mm cabinet, 180 kg net weight and 3/4-inch outlet. Check the 3/4-inch outlet and mating fitting before selecting the distribution pipework.
Air quality and site conditions: Select the receiver, dryer and filters for the required moisture, particulate and oil limits. Provide actual ambient temperature, humidity and dust conditions so that ventilation and maintenance requirements can be reviewed.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
How should the M2.0-10 pressure and airflow range be read?
The specified discharge-pressure range is 0.7–1.0 MPa, with a corresponding air-delivery range of 1.4–1.1 m³/min. This describes pressure-dependent capacity, not the minimum-to-maximum flow modulation range of the VSD. Confirm the output at your selected working pressure when requesting a quotation.
Does the 60 dB(A) specification apply everywhere in the workshop?
The M2.0-10 noise specification is 60 dB(A). Distance, room surfaces, ventilation openings and measurement conditions affect the sound level at a particular location. Compare equipment using equivalent measurement conditions.
How much space does the M2.0-10 require?
The cabinet measures 680 × 610 × 1255 mm (L × W × H), and the net weight is 180 kg. These are equipment dimensions; add the ventilation, access and service clearances specified in the installation instructions.
Does the compressor provide dry, oil-free air on its own?
The M2.0-10 is an oil-injected screw compressor. Select the receiver, dryer and downstream filters for the required moisture, particulate and oil limits at the point of use.
07 Request a Quotation for M2.0-10
Request a quotation for the M2.0-10 with your required working pressure, average and peak air demand, operating hours, available power supply, quantity and destination.
Include the tools used simultaneously, available floor space, operating schedule and required air-treatment equipment.
Leave A Message
Medium Pressure Permanent Magnetic Frequency Conversion Screw Air Compressor
Energy Saving of huada medium pressure permanent magnet frequency conversion screw air compressor can reach 35%.
Huada LGPM-30 22kW Permanent Magnet Servo Screw Air Compressor
The Huada LGPM-30 is a 22kW permanent magnet servo screw compressor with NdFeB magnets and a direct-drive split structure, offering stable pressure and ~40% energy savings under frequent start-stop duty.
Huada LGPM-50 37kW High-Efficiency Permanent Magnet Servo Screw Air Compressor
The Huada LGPM-50 is an A-series 37kW high-efficiency PM servo screw compressor with low noise and intelligent constant-pressure supply, ideal for medium plants.
Huada LGPM-20 15kW Permanent Magnet VSD Screw Air Compressor
The Huada LGPM-20 uses an IE4 permanent magnet motor with IP54 totally-enclosed protection, delivering 35–45% energy savings at 15kW for lines demanding safety and efficiency.
Huada LGPM-10 Energy Saving Screw Air Compressor
The Huada LGPM-10 is a 7.5kW (10hp) permanent magnet VSD screw air compressor built for small workshops and light-duty air demand, saving about 40% energy versus conventional models.
100HPSED series PM two-stage VSD Screw Air Compressor
Permanent magnet use high-srength NdFeB (neodymium iron boron) magnetic steel, high magnetic energyproduct and coercivity of NdFeB magnetic steel, make rare-earth permanent magnet motor have small size , lightweight , high ffient, good character etc, a series of advantages.
175HPSED series PM two-stage VSD Screw Air Compressor
Permanent magnet use high-srength NdFeB (neodymium iron boron) magnetic steel, high magnetic energyproduct and coercivity of NdFeB magnetic steel, make rare-earth permanent magnet motor have small size , lightweight , high ffient, good character etc, a series of advantages.
LGPM-30 permanent magnet variable frequency screw air compressor
Air compressors are the "power tigers" in industrial electricity consumption, with an average power consumption of 20%. How to use the same amount of electricity to produce more air and help users save energy? We have made a series of efforts and research, and have made important breakthroughs. The permanent magnet variable frequency screw compressor developed by the company saves about 40% of electricity for users while ensuring the original working efficiency.
IPv6 network supported
English
français
Deutsch
русский
español
português
日本語
한국의
ไทย
中文
