Item NO.:
SE-10TProduct Origin:
Quanzhou, Fujian, ChinaColor:
Light gray cabinet with blue trim and blue twin reProduct weight:
145 kgShipping Port:
XiamenLead Time:
Depends on configurationThe YILUMA SE-10T is a 7.5 kW oil-injected screw air compressor for repair shops, service bays and workshop pneumatic tool stations. The design provides an enclosed mobile package with twin 50 L receivers. Permanent magnet variable-speed control and direct drive support operation as workshop air demand changes.
Air delivery is 1.10 m³/min at 0.8 MPa, 0.90 m³/min at 1.0 MPa and 0.80 m³/min at 1.3 MPa. The package incorporates 50 L × 2 (100 L total) of receiver capacity, measures 880 × 570 × 1040 mm and weighs 145 kg. Choose the pressure and electrical configuration for the intended tools and duty.
1. 7.5 kW output with defined pressure-duty points
The SE-10T delivers 1.10 m³/min at 0.8 MPa, 0.90 m³/min at 1.0 MPa or 0.80 m³/min at 1.3 MPa. Match the selected duty point to simultaneous tool consumption rather than choosing by motor power alone.
2. IE4 permanent magnet motor and direct drive
An IE4 permanent magnet motor drives the compressor directly. Variable-frequency starting and speed control allow the 7.5 kW package to respond to demand changes. Actual energy use depends on pressure, consumption and operating hours.
3. Wheeled package with 100 L of receiver capacity
The 50 L × 2 (100 L total) arrangement provides local air storage in one mobile assembly. The wheels support repositioning within the work area. Position the compressor securely before operation and maintain access to drains and service points.
4. Enclosed compressor layout
The compressor enclosure is mounted above the blue receivers, with controls at the front. The SE-10T measures 880 × 570 × 1040 mm and weighs 145 kg; allow for its complete operating envelope and service access.
5. Air cooling with an axial fan
An axial cooling fan moves air through the compressor cooling system. Keep the air path unobstructed and provide ventilation at the operating position. This package does not include an aftercooler; downstream cooling and moisture removal should be specified to suit the application.
6. Controller and integrated inverter
The controller provides operating information and works with the integrated variable-frequency system. Confirm the required electrical configuration before ordering so that the motor and inverter package correspond to the installation supply.
7. Serviceable filtration and external oil separation
An intake filter and external oil separator support routine maintenance of the oil-injected compression system. The lubricating oil quantity is 3 L. Use the specified lubricant and service parts, and plan condensate management for the receivers and downstream piping.
YILUMA SE-10T · 7.5 kW · Mobile PM VSD screw compressor
| Parameter | SE-10T |
|---|---|
| Model | SE-10T |
| Compressor type | Oil-injected PM VSD screw compressor |
| Motor power | 7.5 kW |
| Motor efficiency class | IE4 permanent magnet motor |
| Air delivery at 0.8 MPa | 1.10 m³/min |
| Air delivery at 1.0 MPa | 0.90 m³/min |
| Air delivery at 1.3 MPa | 0.80 m³/min |
| Drive arrangement | Direct drive |
| Starting method | Variable-frequency starting |
| Cooling method | Air cooling |
| Power supply configurations | 220 V / 1-phase / 50 or 60 Hz; 380–415 V / 3-phase / 50 or 60 Hz; 440–460 V / 3-phase / 50 or 60 Hz (select at order) |
| Lubricating oil quantity | 3 L |
| Noise level | 75 ± 2 dB(A) |
| Air receiver capacity | 50 L × 2 (100 L total) |
| Aftercooler | Not fitted |
| Dimensions (L × W × H) | 880 × 570 × 1040 mm |
| Unit weight | 145 kg |
| Air outlet | Rc1/2 |
| Product origin | Quanzhou, Fujian, China |
Air delivery values apply to the stated pressure points. The electrical entries are alternative factory configurations, not one universal-input unit. Select voltage, phase and frequency when ordering. No aftercooler is fitted; specify any additional air treatment for the required duty.
Air demand and pressure: Add the simultaneous consumption of the connected tools and compare it with 1.10 m³/min at 0.8 MPa, 0.90 m³/min at 1.0 MPa or 0.80 m³/min at 1.3 MPa. Include distribution pressure losses.
Power supply: Provide the site voltage, phase and frequency. Select one of the listed factory supply configurations and confirm the required electrical connection before ordering.
Position and access: Check the 880 × 570 × 1040 mm dimensions and 145 kg weight against the access route. Place the wheeled unit on a stable surface with clear cooling airflow and service access.
Air treatment and drainage: Provide receiver drainage and condensate management. Assess downstream cooling, drying and filtration against the requirements of the tools or process; the compressor has no aftercooler.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
What is the difference between the SE-10T and SE-10TN?
Both use a 7.5 kW motor and have the same listed delivery points. The SE-10T has a cabinet enclosure, twin 50 L receivers, dimensions of 880 × 570 × 1040 mm and a weight of 145 kg. The SE-10TN has an open-frame layout, twin 45 L receivers, dimensions of 872 × 560 × 818 mm and a weight of 110 kg.
Which delivery value should I use for tool selection?
Use the delivery at the required pressure: 1.10 m³/min at 0.8 MPa, 0.90 m³/min at 1.0 MPa or 0.80 m³/min at 1.3 MPa. Check both simultaneous consumption and duty cycle. The 100 L total receiver capacity can buffer short changes, but it does not increase continuous output.
Can one unit be connected to all listed power supplies?
The power-supply entries identify alternative factory configurations. Specify 220 V single-phase, 380–415 V three-phase or 440–460 V three-phase, together with 50 or 60 Hz, when requesting a quotation. The ordered motor and inverter configuration must match the installation supply.
Does this mobile package include an aftercooler or refrigerated dryer?
No aftercooler is fitted to this model, and a refrigerated dryer is not included in this mobile configuration. Specify any required downstream cooling, drying and filtration for the end use, and provide suitable receiver and condensate drainage.
07 Request a Quotation for SE-10T
Contact us to specify the YILUMA SE-10T for your air system. Send the required operating pressure, average and peak air consumption, site power supply and operating hours so that we can review the selected 7.5 kW configuration.
Include the required outlet air quality, installation conditions, order quantity and destination. We will confirm the equipment scope, technical configuration, delivery arrangements and quotation for your application.
Leave A Message