Item NO.:
SE-20TDProduct Origin:
Quanzhou, Fujian, ChinaColor:
Blue compressor and receiver with blue-and-black dProduct weight:
300 kgShipping Port:
XiamenLead Time:
Depends on configuration
The YILUMA SE-20TD is an integrated 15 kW air station with a 230 L receiver, designed for workshop production cells and local industrial air networks. A permanent magnet variable-speed screw compressor, receiver, refrigerated dryer and precision filtration are arranged in one package to simplify equipment layout.
The 15 kW compressor delivers 2.35 m³/min at 0.8 MPa and 1.65 m³/min at 1.0 MPa. Receiver capacity is 230 L, while the HDAC-20 dryer has a listed processing capacity of 2.0 m³/min. The package measures 1660 × 870 × 1640 mm and weighs 300 kg. Review both compression and air-treatment capacity for the selected operating conditions.
1. Integrated compression, storage and air treatment
The SE-20TD brings the compressor, 230 L receiver, refrigerated dryer and precision filtration together. This arrangement reduces the number of separate equipment positions to plan while keeping the package scope clear during quotation.
2. 15 kW permanent magnet variable-speed compression
PM VSD control adjusts compressor operation as air demand changes. Delivery is 2.35 m³/min at 0.8 MPa and 1.65 m³/min at 1.0 MPa; select the required duty point before checking connected equipment.
3. 230 L receiver for local air storage
The integrated 230 L receiver provides storage between the compressor and the air network. It can buffer short demand changes, but continuous supply remains limited by compressor delivery and the selected air-treatment duty.
4. HDAC-20 refrigerated dryer
The refrigerated dryer has a listed processing capacity of 2.0 m³/min. Its refrigeration system removes moisture by cooling the compressed air and separating condensate. Confirm dryer sizing for the actual pressure, inlet temperature, ambient temperature and duty.
5. Precision filtration in the package
Precision filters complement the refrigerated dryer by treating contaminants in the compressed-air stream. Specify the required outlet air quality and confirm the filter configuration for the end use, including any pressure-loss allowance.
6. Air-cooled package with accessible controls
Air cooling and front-mounted controls support routine operation of the integrated station. Provide an unobstructed ventilation path around the compressor and dryer, and keep drains, filters and service panels accessible.
7. Defined footprint and outlet for layout review
The 1660 × 870 × 1640 mm package weighs 300 kg and uses a G1 outlet. Use these values when reviewing the installation route, operating position and connection to the workshop air network.
YILUMA SE-20TD · 15 kW · Compressor, receiver, refrigerated dryer and filtration package
| Parameter | SE-20TD |
|---|---|
| Model | SE-20TD |
| Compressor type | Oil-injected single-stage PM VSD screw compressor |
| Motor power | 15 kW |
| Air delivery at 0.8 MPa | 2.35 m³/min |
| Air delivery at 1.0 MPa | 1.65 m³/min |
| Starting method | Variable-frequency starting |
| Cooling method | Air cooling |
| Discharge temperature | ≤ Ambient temperature + 15°C |
| Power supply | 380–415 V / 3-phase / 50 Hz |
| Lubricating oil quantity | 5 L |
| Air receiver capacity | 230 L |
| Refrigerated dryer model | HDAC-20 |
| Dryer processing capacity | 2.0 m³/min |
| Dimensions (L × W × H) | 1660 × 870 × 1640 mm |
| Unit weight | 300 kg |
| Air outlet | G1 |
| Product origin | Quanzhou, Fujian, China |
Values shown describe the selected 380–415 V, three-phase, 50 Hz package. Compressor delivery and dryer processing capacity are separate ratings; confirm the complete air-treatment selection for the actual pressure, inlet and ambient temperatures, and duty. Receiver, dryer and filter configuration must be stated in the quotation.
Compressor and dryer capacity: Check compressor delivery of 2.35/1.65 m³/min at 0.8/1.0 MPa together with the HDAC-20 dryer rating of 2.0 m³/min. Confirm that the complete package can satisfy the intended duty.
Power supply: The selected package is 380–415 V, three-phase, 50 Hz. Provide the site supply and confirm the compressor, dryer and control electrical requirements in the order specification.
Installation and ventilation: Allow for 1660 × 870 × 1640 mm dimensions, 300 kg unit weight and a G1 outlet. Provide cooling ventilation and service access for both the compressor and dryer.
Air quality and condensate: State the required outlet air quality. Plan receiver and dryer drainage, condensate handling and downstream pressure-loss allowances, and confirm any additional treatment needed by the process.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
How should the SE-20TD dryer be checked for the intended duty?
Compressor air delivery is 2.35 m³/min at 0.8 MPa and 1.65 m³/min at 1.0 MPa. The HDAC-20 dryer has a listed processing capacity of 2.0 m³/min. These values must be checked together for the intended pressure, inlet temperature, ambient temperature and air demand. Request confirmation of suitable dryer sizing before specifying continuous full-flow operation.
What equipment is included in the integrated package?
The SE-20TD combines a 15 kW PM VSD screw compressor, a 230 L receiver, a HDAC-20 refrigerated dryer and precision filtration. Confirm the final receiver, dryer, filter and drain arrangement in the quotation so that the equipment scope and air-quality requirements are clear.
Can the receiver increase continuous air delivery?
The 230 L receiver stores compressed air and can buffer short changes in demand. Continuous compressor delivery remains 2.35 m³/min at 0.8 MPa or 1.65 m³/min at 1.0 MPa. Also check dryer processing capacity when specifying the complete system.
What information is needed to specify this air station?
Provide the required pressure, average and peak consumption, outlet air quality, site voltage and frequency, ambient and inlet temperatures, operating hours and destination. Include installation access for the 1660 × 870 × 1640 mm, 300 kg package. These details are used to confirm compressor and air-treatment selection.
07 Request a Quotation for SE-20TD
Contact us to specify the YILUMA SE-20TD for your air system. Send the required operating pressure, average and peak air consumption, site power supply and operating hours so that we can review the selected 15 kW configuration.
Include the required outlet air quality, installation conditions, order quantity and destination. We will confirm the equipment scope, technical configuration, delivery arrangements and quotation for your application.
Leave A Message