PRODUCTS
Products
Home /Rotary Screw Air Compressors /Mobile Screw Compressors /

SE Mobile Series

/YILUMA SE-5T 4 kW Compact Mobile PM VSD Screw Air Compressor

YILUMA SE-5T 4 kW Compact Mobile PM VSD Screw Air Compressor

YILUMA SE-5T is a 4 kW mobile PM VSD screw air compressor delivering 0.55 m³/min at 0.8 MPa. Its direct-drive assembly, wheeled base and 70 L total receiver capacity suit local workshop air supply. Dimensions: 772 × 570 × 940 mm; unit weight: 120 kg.

  • Item NO.:

    SE-5T
  • Product Origin:

    Quanzhou, Fujian, China
  • Color:

    Light gray cabinet with blue trim and blue twin re
  • Product weight:

    120 kg
  • Shipping Port:

    Xiamen
  • Lead Time:

    Depends on configuration
Share To :
New Products
  • Product Details

SE-5T at a glance

The YILUMA SE-5T is a 4 kW oil-injected screw air compressor for small repair workshops, individual pneumatic workstations and maintenance areas. The design provides a compact air source for one workstation or a small tool group. Permanent magnet variable-speed control and direct drive support operation as workshop air demand changes.

Air delivery is 0.55 m³/min at 0.8 MPa, 0.40 m³/min at 1.0 MPa and 0.35 m³/min at 1.3 MPa. The package incorporates 35 L × 2 (70 L total) of receiver capacity, measures 772 × 570 × 940 mm and weighs 120 kg. Choose the pressure and electrical configuration for the intended tools and duty.

01   Product advantages

1. 4 kW output with defined pressure-duty points
The SE-5T delivers 0.55 m³/min at 0.8 MPa, 0.40 m³/min at 1.0 MPa or 0.35 m³/min at 1.3 MPa. Match the selected duty point to simultaneous tool consumption rather than choosing by motor power alone.

2. IE4 permanent magnet motor and direct drive
An IE4 permanent magnet motor drives the compressor directly. Variable-frequency starting and speed control allow the 4 kW package to respond to demand changes. Actual energy use depends on pressure, consumption and operating hours.

3. Wheeled package with 70 L of receiver capacity
The 35 L × 2 (70 L total) arrangement provides local air storage in one mobile assembly. The wheels support repositioning within the work area. Position the compressor securely before operation and maintain access to drains and service points.

4. Enclosed compressor layout
The compressor enclosure is mounted above the blue receivers, with controls at the front. The SE-5T measures 772 × 570 × 940 mm and weighs 120 kg; allow for its complete operating envelope and service access.

5. Air cooling with an axial fan
An axial cooling fan moves air through the compressor cooling system. Keep the air path unobstructed and provide ventilation at the operating position. This package does not include an aftercooler; downstream cooling and moisture removal should be specified to suit the application.

6. Controller and integrated inverter
The controller provides operating information and works with the integrated variable-frequency system. Confirm the required electrical configuration before ordering so that the motor and inverter package correspond to the installation supply.

7. Serviceable filtration and external oil separation
An intake filter and external oil separator support routine maintenance of the oil-injected compression system. The lubricating oil quantity is 2 L. Use the specified lubricant and service parts, and plan condensate management for the receivers and downstream piping.

YILUMA SE-5T 4 kW mobile PM VSD screw air compressor, light gray cabinet with blue trim and blue twin receivers

YILUMA SE-5T · 4 kW · Mobile PM VSD screw compressor

02   Technical specifications

Parameter SE-5T
Model SE-5T
Compressor type Oil-injected PM VSD screw compressor
Motor power 4 kW
Motor efficiency class IE4 permanent magnet motor
Air delivery at 0.8 MPa 0.55 m³/min
Air delivery at 1.0 MPa 0.40 m³/min
Air delivery at 1.3 MPa 0.35 m³/min
Drive arrangement Direct drive
Starting method Variable-frequency starting
Cooling method Air cooling
Power supply configurations 220 V / 1-phase / 50 or 60 Hz; 380–415 V / 3-phase / 50 or 60 Hz; 440–460 V / 3-phase / 50 or 60 Hz (select at order)
Lubricating oil quantity 2 L
Noise level 65 ± 2 dB(A)
Air receiver capacity 35 L × 2 (70 L total)
Aftercooler Not fitted
Dimensions (L × W × H) 772 × 570 × 940 mm
Unit weight 120 kg
Air outlet Rc1/2
Product origin Quanzhou, Fujian, China

Air delivery values apply to the stated pressure points. The electrical entries are alternative factory configurations, not one universal-input unit. Select voltage, phase and frequency when ordering. No aftercooler is fitted; specify any additional air treatment for the required duty.

03   Check the fit for your site

Air demand and pressure: Add the simultaneous consumption of the connected tools and compare it with 0.55 m³/min at 0.8 MPa, 0.40 m³/min at 1.0 MPa or 0.35 m³/min at 1.3 MPa. Include distribution pressure losses.

Power supply: Provide the site voltage, phase and frequency. Select one of the listed factory supply configurations and confirm the required electrical connection before ordering.

Position and access: Check the 772 × 570 × 940 mm dimensions and 120 kg weight against the access route. Place the wheeled unit on a stable surface with clear cooling airflow and service access.

Air treatment and drainage: Provide receiver drainage and condensate management. Assess downstream cooling, drying and filtration against the requirements of the tools or process; the compressor has no aftercooler.

04   Purchasing information

Before you order What to confirm

Quotation requirements

Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination.

Equipment scope

The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included.

Delivery and shipment

Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination.

Technical documentation

Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration.

Warranty and after-sales support

Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents.

05   Manufacturing and documentation

Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.

HUADA compressor assembly testing area screw compressor workshop and warehouse

View our factory
Review qualification documents

06   Frequently asked questions

How does the SE-5T suit a small workshop?

Its 4 kW motor, twin 35 L receivers and wheeled layout provide a compact local air source. Air delivery is 0.55 m³/min at 0.8 MPa; check the combined consumption and duty cycle of the connected tools before selection. The receivers buffer short demand changes but do not increase continuous compressor output.

Which delivery value should I use for tool selection?

Use the delivery at the required pressure: 0.55 m³/min at 0.8 MPa, 0.40 m³/min at 1.0 MPa or 0.35 m³/min at 1.3 MPa. Check both simultaneous consumption and duty cycle. The 70 L total receiver capacity can buffer short changes, but it does not increase continuous output.

Can one unit be connected to all listed power supplies?

The power-supply entries identify alternative factory configurations. Specify 220 V single-phase, 380–415 V three-phase or 440–460 V three-phase, together with 50 or 60 Hz, when requesting a quotation. The ordered motor and inverter configuration must match the installation supply.

Does this mobile package include an aftercooler or refrigerated dryer?

No aftercooler is fitted to this model, and a refrigerated dryer is not included in this mobile configuration. Specify any required downstream cooling, drying and filtration for the end use, and provide suitable receiver and condensate drainage.

07  Request a Quotation for SE-5T

Contact us to specify the YILUMA SE-5T for your air system. Send the required operating pressure, average and peak air consumption, site power supply and operating hours so that we can review the selected 4 kW configuration.

Include the required outlet air quality, installation conditions, order quantity and destination. We will confirm the equipment scope, technical configuration, delivery arrangements and quotation for your application.

Request a Quote



Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
YILUMA SE-10T 7.5 kW mobile PM VSD screw air compressor, light gray cabinet with blue trim and blue twin receivers YILUMA SE-10T 7.5 kW PM VSD Mobile Screw Air Compressor

YILUMA SE-10T is a 7.5 kW mobile PM VSD screw air compressor delivering 1.10 m³/min at 0.8 MPa. Its direct-drive assembly, wheeled base and 100 L total receiver capacity suit local workshop air supply. Dimensions: 880 × 570 × 1040 mm; unit weight: 145 kg.

YILUMA SE-20TN 15 kW mobile PM VSD screw air compressor, blue twin receivers with black open-frame compressor components YILUMA SE-20TN 15 kW Open-Frame Mobile PM VSD Screw Air Compressor

YILUMA SE-20TN is a 15 kW mobile PM VSD screw air compressor delivering 2.35 m³/min at 0.8 MPa. Its direct-drive, open-frame assembly and twin 90 L receivers provide a workshop air source with 180 L total storage. Dimensions: 1127 × 660 × 1085 mm; unit weight: 190 kg.

YILUMA SE-10TN 7.5 kW mobile PM VSD screw air compressor, blue twin receivers with black open-frame compressor components YILUMA SE-10TN 7.5 kW Open-Frame Mobile PM VSD Screw Air Compressor

YILUMA SE-10TN is a 7.5 kW mobile PM VSD screw air compressor delivering 1.10 m³/min at 0.8 MPa. Its direct-drive assembly, wheeled base and 90 L total receiver capacity suit local workshop air supply. Dimensions: 872 × 560 × 818 mm; unit weight: 110 kg.

YILUMA SE-5TN 4 kW mobile PM VSD screw air compressor, blue twin receivers with black open-frame compressor components YILUMA SE-5TN 4 kW Open-Frame Mobile PM VSD Screw Air Compressor

YILUMA SE-5TN is a 4 kW mobile PM VSD screw air compressor delivering 0.55 m³/min at 0.8 MPa. Its direct-drive, open-frame assembly and twin 26 L receivers provide a compact workshop air source with 52 L total storage. Dimensions: 740 × 530 × 780 mm; unit weight: 80 kg.

Screw Type Air Compressor 7.5kW 10HP Screw Type Air Compressor

7.5 KW c series screw type air compressor adopts belt driven, which has the characteristics of efficient power transmission and easy maintenance by replacing the belt.

55kw compressor wholesale 55kw Latest New Design T Series Two-stage Compression Vsd Screw Air Compressor

T series permanent magnet two-stage compression screw compressor adopts a new type of two-stage screw main engine,which contains two independent compression units,optimizes the internal structure of the rotor and high-efficiency two-stage compression provides the world's highest level of displacement.

Huada HB-20TD Medium-Pressure Permanent Magnet Variable Frequency Integrated Machine – 15 kW Laser Cutting Integrated Machine Compressor HB-20TD Medium-Pressure Permanent Magnet Variable Frequency Drive Unit (15 kW, dedicated for laser cutting applications)

The HB-20TD is the flagship model in Huada's medium-pressure integrated system series, featuring a 15 kW permanent magnet frequency converter with a discharge capacity of 1.5 m³/min and stable pressure of 1.6 MPa, specifically designed for 1500–3000 W fiber laser cutting machines. Its integrated solution simplifies traditional multi-unit series configurations into a single unit, offering compact size, short piping requirements, and low pressure loss.

Yiluma S-10 7.5 kW 10 HP compact rotary screw air compressor Yiluma S-10 7.5 kW / 10 HP Compact Screw Air Compressor

Short on floor space? The S-10 delivers 1.08 m³/min at 8 bar from a compact 7.5 kW unit, with an 880 × 660 mm footprint.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact