Item NO.:
SE-5TNProduct Origin:
Quanzhou, Fujian, ChinaColor:
Blue twin receivers with black open-frame compressProduct weight:
80 kgShipping Port:
XiamenLead Time:
Depends on configurationThe YILUMA SE-5TN is a 4 kW oil-injected screw air compressor for small repair workshops, maintenance areas and individual pneumatic workstations. Its open-frame layout combines a permanent magnet variable-speed compressor, direct drive and twin receivers on a wheeled base for a compact local air supply.
Air delivery is 0.55 m³/min at 0.8 MPa, 0.40 m³/min at 1.0 MPa and 0.35 m³/min at 1.3 MPa. The 26 L × 2 receiver arrangement provides 52 L total storage. Overall dimensions are 740 × 530 × 780 mm, unit weight is 80 kg and the air outlet is Rc1/2. Select the pressure and electrical configuration for the connected tools and working conditions.
1. 4 kW capacity for local workshop air supply
The SE-5TN delivers 0.55 m³/min at 0.8 MPa, 0.40 m³/min at 1.0 MPa or 0.35 m³/min at 1.3 MPa. Use the delivery at the required pressure to assess simultaneous tool consumption and duty cycle.
2. IE4 permanent magnet motor with direct drive
An IE4 permanent magnet motor drives the screw compressor directly. Variable-frequency starting and speed control allow the package to respond to changing air demand. Actual energy use depends on the selected pressure, consumption and operating hours.
3. Twin 26 L receivers on a wheeled base
Two 26 L receivers provide 52 L total air storage within the mobile assembly. This storage helps buffer short demand changes; it does not increase continuous compressor output. The wheels support repositioning around a workshop.
4. Compact 740 × 530 × 780 mm package
The open-frame assembly has an 80 kg unit weight and accessible compressor components. Its compact dimensions suit local work areas where space, service access and the route into the workshop need to be considered together.
5. Air cooling with an axial fan
The air-cooled configuration uses an axial fan for cooling airflow. The noise specification is 65 ± 2 dB(A). Keep the cooling path clear and provide a clean, ventilated operating position.
6. External oil separation and 2 L oil quantity
An external oil separator is used in the oil-injected compressor system, with a specified lubricating oil quantity of 2 L. Maintain access to the oil system, intake filter and receiver drains for routine servicing.
7. Defined electrical options and air-treatment scope
Choose the required voltage, phase and frequency when ordering. The air outlet is Rc1/2, and no aftercooler is fitted to the SE-5TN. Specify downstream cooling, drying and filtration to meet the requirements of the end use.
YILUMA SE-5TN · 4 kW · Open-frame mobile PM VSD screw compressor
| Parameter | SE-5TN |
|---|---|
| Model | SE-5TN |
| Compressor type | Oil-injected PM VSD screw compressor |
| Motor power | 4 kW |
| Motor efficiency class | IE4 permanent magnet motor |
| Air delivery at 0.8 MPa | 0.55 m³/min |
| Air delivery at 1.0 MPa | 0.40 m³/min |
| Air delivery at 1.3 MPa | 0.35 m³/min |
| Drive arrangement | Direct drive |
| Starting method | Variable-frequency starting |
| Cooling method | Air cooling (axial fan) |
| Power supply configurations | 220 V / 1-phase / 50 or 60 Hz; 380–415 V / 3-phase / 50 or 60 Hz; 440–460 V / 3-phase / 50 or 60 Hz (select at order) |
| Lubricating oil quantity | 2 L |
| Noise level | 65 ± 2 dB(A) |
| Air receiver capacity | 26 L × 2 (52 L total) |
| Aftercooler | Not fitted |
| Dimensions (L × W × H) | 740 × 530 × 780 mm |
| Unit weight | 80 kg |
| Air outlet | Rc1/2 |
| Product origin | Quanzhou, Fujian, China |
Air delivery values apply to the stated pressure points. The electrical entries are alternative factory configurations, not one universal-input unit; select voltage, phase and frequency when ordering. No aftercooler is fitted to the SE-5TN. Specify additional air treatment for the required duty.
Air demand and pressure: Compare the combined consumption of tools operating together with 0.55 m³/min at 0.8 MPa, 0.40 m³/min at 1.0 MPa or 0.35 m³/min at 1.3 MPa. Include distribution pressure losses and the required duty cycle.
Power supply: Provide the site voltage, phase and frequency so that the motor and inverter can be configured for the installation. Select one factory supply configuration before ordering.
Position and access: Check the 740 × 530 × 780 mm dimensions and 80 kg unit weight against the access route and operating space. Position the wheeled unit securely on a stable surface with clear cooling airflow and service access.
Air treatment and drainage: Provide drainage for both receivers and suitable condensate management. Because the SE-5TN has no aftercooler, assess downstream cooling, drying and filtration for the connected tools or process.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
What does the SE-5TN mobile package include?
The SE-5TN combines a 4 kW open-frame PM VSD screw compressor, direct drive, a controller and twin 26 L receivers on a wheeled base. Total receiver capacity is 52 L. The package measures 740 × 530 × 780 mm and weighs 80 kg.
Which air-delivery value should I use when selecting tools?
Use the value at the pressure required by the tools: 0.55 m³/min at 0.8 MPa, 0.40 m³/min at 1.0 MPa or 0.35 m³/min at 1.3 MPa. Check simultaneous consumption and duty cycle. The 52 L total receiver capacity buffers short demand changes but does not add continuous air-delivery capacity.
Can the same SE-5TN unit use every listed power supply?
The listed supplies are alternative factory configurations. Specify 220 V single-phase, 380–415 V three-phase or 440–460 V three-phase, together with 50 or 60 Hz, when requesting a quotation. The ordered motor and inverter configuration must match the site supply.
Does the SE-5TN include an aftercooler or refrigerated dryer?
No aftercooler is fitted to the SE-5TN, and a refrigerated dryer is not included in this mobile compressor-and-receiver configuration. Specify the downstream cooling, drying and filtration needed for the application, along with receiver and condensate drainage.
07 Request a Quotation for SE-5TN
Contact us to specify the YILUMA SE-5TN for your workshop. Send the required operating pressure, average and peak air consumption, site power supply and operating hours so that we can review the selected 4 kW configuration.
Include the required outlet air quality, installation conditions, order quantity and destination. We will confirm the equipment scope, technical configuration, delivery arrangements and quotation for your application.
Leave A Message