PRODUCTS
Products
Home /Rotary Screw Air Compressors /Mobile Screw Compressors /

SE Mobile Series

/YILUMA SE-10TN 7.5 kW Open-Frame Mobile PM VSD Screw Air Compressor

YILUMA SE-10TN 7.5 kW Open-Frame Mobile PM VSD Screw Air Compressor

YILUMA SE-10TN is a 7.5 kW mobile PM VSD screw air compressor delivering 1.10 m³/min at 0.8 MPa. Its direct-drive assembly, wheeled base and 90 L total receiver capacity suit local workshop air supply. Dimensions: 872 × 560 × 818 mm; unit weight: 110 kg.

  • Item NO.:

    SE-10TN
  • Product Origin:

    Quanzhou, Fujian, China
  • Color:

    Blue twin receivers with black open-frame compress
  • Product weight:

    110 kg
  • Shipping Port:

    Xiamen
  • Lead Time:

    Depends on configuration
Share To :
New Products
  • Product Details

SE-10TN at a glance

The YILUMA SE-10TN is a 7.5 kW oil-injected screw air compressor for maintenance stations, service workshops and local pneumatic work areas. The design provides an open-frame mobile package with accessible compressor components. Permanent magnet variable-speed control and direct drive support operation as workshop air demand changes.

Air delivery is 1.10 m³/min at 0.8 MPa, 0.90 m³/min at 1.0 MPa and 0.80 m³/min at 1.3 MPa. The package incorporates 45 L × 2 (90 L total) of receiver capacity, measures 872 × 560 × 818 mm and weighs 110 kg. Choose the pressure and electrical configuration for the intended tools and duty.

01   Product advantages

1. 7.5 kW output with defined pressure-duty points
The SE-10TN delivers 1.10 m³/min at 0.8 MPa, 0.90 m³/min at 1.0 MPa or 0.80 m³/min at 1.3 MPa. Match the selected duty point to simultaneous tool consumption rather than choosing by motor power alone.

2. IE4 permanent magnet motor and direct drive
An IE4 permanent magnet motor drives the compressor directly. Variable-frequency starting and speed control allow the 7.5 kW package to respond to demand changes. Actual energy use depends on pressure, consumption and operating hours.

3. Wheeled package with 90 L of receiver capacity
The 45 L × 2 (90 L total) arrangement provides local air storage in one mobile assembly. The wheels support repositioning within the work area. Position the compressor securely before operation and maintain access to drains and service points.

4. Open-frame access
The open-frame arrangement leaves major compressor components visible and accessible. At 872 × 560 × 818 mm and 110 kg, the SE-10TN can be assessed against the available access route and maintenance space.

5. Air cooling with an axial fan
An axial cooling fan moves air through the compressor cooling system. Keep the air path unobstructed and provide ventilation at the operating position. This package does not include an aftercooler; downstream cooling and moisture removal should be specified to suit the application.

6. Controller and integrated inverter
The controller provides operating information and works with the integrated variable-frequency system. Confirm the required electrical configuration before ordering so that the motor and inverter package correspond to the installation supply.

7. Serviceable filtration and external oil separation
An intake filter and external oil separator support routine maintenance of the oil-injected compression system. The lubricating oil quantity is 3 L. Use the specified lubricant and service parts, and plan condensate management for the receivers and downstream piping.

YILUMA SE-10TN 7.5 kW mobile PM VSD screw air compressor, blue twin receivers with black open-frame compressor components

YILUMA SE-10TN · 7.5 kW · Mobile PM VSD screw compressor

02   Technical specifications

Parameter SE-10TN
Model SE-10TN
Compressor type Oil-injected PM VSD screw compressor
Motor power 7.5 kW
Motor efficiency class IE4 permanent magnet motor
Air delivery at 0.8 MPa 1.10 m³/min
Air delivery at 1.0 MPa 0.90 m³/min
Air delivery at 1.3 MPa 0.80 m³/min
Drive arrangement Direct drive
Starting method Variable-frequency starting
Cooling method Air cooling
Power supply configurations 220 V / 1-phase / 50 or 60 Hz; 380–415 V / 3-phase / 50 or 60 Hz; 440–460 V / 3-phase / 50 or 60 Hz (select at order)
Lubricating oil quantity 3 L
Noise level 75 ± 2 dB(A)
Air receiver capacity 45 L × 2 (90 L total)
Aftercooler Not fitted
Dimensions (L × W × H) 872 × 560 × 818 mm
Unit weight 110 kg
Air outlet Rc1/2
Product origin Quanzhou, Fujian, China

Air delivery values apply to the stated pressure points. The electrical entries are alternative factory configurations, not one universal-input unit. Select voltage, phase and frequency when ordering. No aftercooler is fitted; specify any additional air treatment for the required duty.

03   Check the fit for your site

Air demand and pressure: Add the simultaneous consumption of the connected tools and compare it with 1.10 m³/min at 0.8 MPa, 0.90 m³/min at 1.0 MPa or 0.80 m³/min at 1.3 MPa. Include distribution pressure losses.

Power supply: Provide the site voltage, phase and frequency. Select one of the listed factory supply configurations and confirm the required electrical connection before ordering.

Position and access: Check the 872 × 560 × 818 mm dimensions and 110 kg weight against the access route. Place the wheeled unit on a stable surface with clear cooling airflow and service access.

Air treatment and drainage: Provide receiver drainage and condensate management. Assess downstream cooling, drying and filtration against the requirements of the tools or process; the compressor has no aftercooler.

04   Purchasing information

Before you order What to confirm

Quotation requirements

Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination.

Equipment scope

The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included.

Delivery and shipment

Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination.

Technical documentation

Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration.

Warranty and after-sales support

Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents.

05   Manufacturing and documentation

Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.

HUADA compressor assembly testing area screw compressor workshop and warehouse

View our factory
Review qualification documents

06   Frequently asked questions

What does the open-frame SE-10TN configuration include?

The SE-10TN combines an exposed compressor assembly, a controller and twin 45 L receivers on a wheeled base. Its dimensions are 872 × 560 × 818 mm and its weight is 110 kg. Plan a clean, ventilated operating position and keep access to hot and moving components controlled during operation.

Which delivery value should I use for tool selection?

Use the delivery at the required pressure: 1.10 m³/min at 0.8 MPa, 0.90 m³/min at 1.0 MPa or 0.80 m³/min at 1.3 MPa. Check both simultaneous consumption and duty cycle. The 90 L total receiver capacity can buffer short changes, but it does not increase continuous output.

Can one unit be connected to all listed power supplies?

The power-supply entries identify alternative factory configurations. Specify 220 V single-phase, 380–415 V three-phase or 440–460 V three-phase, together with 50 or 60 Hz, when requesting a quotation. The ordered motor and inverter configuration must match the installation supply.

Does this mobile package include an aftercooler or refrigerated dryer?

No aftercooler is fitted to this model, and a refrigerated dryer is not included in this mobile configuration. Specify any required downstream cooling, drying and filtration for the end use, and provide suitable receiver and condensate drainage.

07  Request a Quotation for SE-10TN

Contact us to specify the YILUMA SE-10TN for your air system. Send the required operating pressure, average and peak air consumption, site power supply and operating hours so that we can review the selected 7.5 kW configuration.

Include the required outlet air quality, installation conditions, order quantity and destination. We will confirm the equipment scope, technical configuration, delivery arrangements and quotation for your application.

Request a Quote


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
YILUMA SE-10T 7.5 kW mobile PM VSD screw air compressor, light gray cabinet with blue trim and blue twin receivers YILUMA SE-10T 7.5 kW PM VSD Mobile Screw Air Compressor

YILUMA SE-10T is a 7.5 kW mobile PM VSD screw air compressor delivering 1.10 m³/min at 0.8 MPa. Its direct-drive assembly, wheeled base and 100 L total receiver capacity suit local workshop air supply. Dimensions: 880 × 570 × 1040 mm; unit weight: 145 kg.

YILUMA SE-20TN 15 kW mobile PM VSD screw air compressor, blue twin receivers with black open-frame compressor components YILUMA SE-20TN 15 kW Open-Frame Mobile PM VSD Screw Air Compressor

YILUMA SE-20TN is a 15 kW mobile PM VSD screw air compressor delivering 2.35 m³/min at 0.8 MPa. Its direct-drive, open-frame assembly and twin 90 L receivers provide a workshop air source with 180 L total storage. Dimensions: 1127 × 660 × 1085 mm; unit weight: 190 kg.

YILUMA SE-5T 4 kW Compact Mobile PM VSD Screw Air Compressor YILUMA SE-5T 4 kW Compact Mobile PM VSD Screw Air Compressor

YILUMA SE-5T is a 4 kW mobile PM VSD screw air compressor delivering 0.55 m³/min at 0.8 MPa. Its direct-drive assembly, wheeled base and 70 L total receiver capacity suit local workshop air supply. Dimensions: 772 × 570 × 940 mm; unit weight: 120 kg.

YILUMA SE-5TN 4 kW mobile PM VSD screw air compressor, blue twin receivers with black open-frame compressor components YILUMA SE-5TN 4 kW Open-Frame Mobile PM VSD Screw Air Compressor

YILUMA SE-5TN is a 4 kW mobile PM VSD screw air compressor delivering 0.55 m³/min at 0.8 MPa. Its direct-drive, open-frame assembly and twin 26 L receivers provide a compact workshop air source with 52 L total storage. Dimensions: 740 × 530 × 780 mm; unit weight: 80 kg.

HUADA LGGPM-100 75 kW air-cooled two-stage PM VSD screw compressor with orange enclosure and dark panels HUADA LGGPM-100 75 kW Air-Cooled Two-Stage Permanent Magnet VSD Screw Air Compressor

The HUADA LGGPM-100 is a 75 kW New A Series two-stage permanent magnet VSD screw air compressor with an air delivery of 16.5 m³/min at 0.8 MPa. A DN65 outlet and variable-speed centrifugal cooling support integration into a medium-capacity plant air station.

YILUMA SE-20TN 15 kW mobile PM VSD screw air compressor, blue twin receivers with black open-frame compressor components YILUMA SE-20TN 15 kW Open-Frame Mobile PM VSD Screw Air Compressor

YILUMA SE-20TN is a 15 kW mobile PM VSD screw air compressor delivering 2.35 m³/min at 0.8 MPa. Its direct-drive, open-frame assembly and twin 90 L receivers provide a workshop air source with 180 L total storage. Dimensions: 1127 × 660 × 1085 mm; unit weight: 190 kg.

LGPM-30TD 22 kW all-in-one screw air compressor for laser cutting LGPM-30TD 22 kW 16 bar All-in-One Screw Air Compressor for Laser Cutting

The LGPM-30TD is a permanent magnet VSD all-in-one screw air compressor for laser cutting air supply, with a 22 kW compressor motor. Its compressor air delivery is 2.2 m³/min at 16 bar. The package integrates a screw compressor, refrigerated dryer, precision filters and air receiver. The HD-30AC dryer has a treatment capacity of 3.0 m³/min. This integrated arrangement reduces inter-component piping work and provides drying and filtration in a 1850 × 1320 × 1860 mm package.

HUADA TVD-30+ 22 kW two-stage permanent magnet VSD screw air compressor HUADA TVD-30+ 22 kW Two-Stage Permanent Magnet VSD Screw Air Compressor

The HUADA TVD-30+ is a 22 kW two-stage permanent magnet VSD screw air compressor for production lines with varying compressed-air demand. At 0.7 MPa, the 0.6-0.8 MPa version is listed at 4.5 m³/min and the 0.6-1.0 MPa version at 3.6 m³/min. The air-cooled package uses an external oil separator.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact