Item NO.:
SE-20TNProduct Origin:
Quanzhou, Fujian, ChinaColor:
Blue twin receivers with black open-frame compressProduct weight:
190 kgShipping Port:
XiamenLead Time:
Depends on configurationThe YILUMA SE-20TN is a 15 kW oil-injected screw air compressor for service workshops, maintenance facilities and local pneumatic equipment groups. Permanent magnet variable-speed control and direct drive are combined in an open-frame assembly, with twin receivers and wheels for a mobile workshop air supply.
Air delivery is 2.35 m³/min at 0.8 MPa, 2.0 m³/min at 1.0 MPa and 1.70 m³/min at 1.3 MPa. The 90 L × 2 receiver arrangement provides 180 L total storage. Overall dimensions are 1127 × 660 × 1085 mm, unit weight is 190 kg and the air outlet is Rc3/4. Match the selected pressure and electrical configuration to the intended equipment and duty.
1. 15 kW output for workshop equipment groups
The SE-20TN delivers 2.35 m³/min at 0.8 MPa, 2.0 m³/min at 1.0 MPa or 1.70 m³/min at 1.3 MPa. Assess the simultaneous air consumption and duty cycle of the connected equipment using the delivery at the required pressure.
2. IE4 permanent magnet motor with direct drive
An IE4 permanent magnet motor drives the screw compressor directly. Variable-frequency starting and speed control allow the 15 kW package to respond to changes in workshop air demand. Actual energy use depends on the pressure setting and operating profile.
3. Twin 90 L receivers with 180 L total storage
Two 90 L receivers are integrated into the mobile assembly, providing 180 L total storage to buffer short demand changes. Receiver storage supports the air system during brief peaks but does not increase continuous compressor output.
4. Open-frame access in a wheeled assembly
The package measures 1127 × 660 × 1085 mm and weighs 190 kg. Its open-frame layout provides access to compressor components, while the wheels support repositioning within the work area. Check the access route and intended operating position before installation.
5. Air cooling with an axial fan
The air-cooled configuration uses an axial fan for cooling airflow. The noise specification is 78 ± 2 dB(A). Allow clearance for airflow and routine service, and select an operating position appropriate for the workshop environment.
6. External oil separation and 5 L oil quantity
An external oil separator is used in the oil-injected compressor system, with a specified lubricating oil quantity of 5 L. Keep the oil system, intake filter and receiver drainage points accessible for routine maintenance.
7. Rc3/4 connection and order-specific electrical configuration
The Rc3/4 air outlet connects the package to the local air distribution system. Specify the required voltage, phase and frequency before ordering, and select downstream drying and filtration for the required outlet air quality.
YILUMA SE-20TN · 15 kW · Open-frame mobile PM VSD screw compressor
| Parameter | SE-20TN |
|---|---|
| Model | SE-20TN |
| Compressor type | Oil-injected PM VSD screw compressor |
| Motor power | 15 kW |
| Motor efficiency class | IE4 permanent magnet motor |
| Air delivery at 0.8 MPa | 2.35 m³/min |
| Air delivery at 1.0 MPa | 2.0 m³/min |
| Air delivery at 1.3 MPa | 1.70 m³/min |
| Drive arrangement | Direct drive |
| Starting method | Variable-frequency starting |
| Cooling method | Air cooling (axial fan) |
| Power supply configurations | 220 V / 1-phase / 50 or 60 Hz; 380–415 V / 3-phase / 50 or 60 Hz; 440–460 V / 3-phase / 50 or 60 Hz (select at order) |
| Lubricating oil quantity | 5 L |
| Noise level | 78 ± 2 dB(A) |
| Air receiver capacity | 90 L × 2 (180 L total) |
| Dimensions (L × W × H) | 1127 × 660 × 1085 mm |
| Unit weight | 190 kg |
| Air outlet | Rc3/4 |
| Product origin | Quanzhou, Fujian, China |
Air delivery values apply to the stated pressure points. The electrical entries are alternative factory configurations, not one universal-input unit; confirm the required voltage, phase and frequency for the 15 kW order. Specify the cooling and downstream air-treatment scope for the application.
Air demand and pressure: Compare simultaneous equipment consumption with 2.35 m³/min at 0.8 MPa, 2.0 m³/min at 1.0 MPa or 1.70 m³/min at 1.3 MPa. Include distribution pressure losses and the expected duty cycle.
Power supply: Provide the site voltage, phase and frequency, and confirm the factory motor and inverter configuration for the 15 kW package. The supply alternatives represent separate order configurations.
Position and access: Check the 1127 × 660 × 1085 mm dimensions and 190 kg unit weight against the access route, floor and operating space. Position the wheeled package securely on a stable surface with clear cooling airflow and service access.
Air treatment and drainage: Provide drainage for both receivers and suitable condensate management. Select downstream drying and filtration to suit the tools or process, and confirm the cooling and treatment equipment included in the quotation.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
What does the SE-20TN mobile package include?
The SE-20TN combines a 15 kW open-frame PM VSD screw compressor, direct drive, a controller and twin 90 L receivers on a wheeled base. Total receiver capacity is 180 L. The package measures 1127 × 660 × 1085 mm and weighs 190 kg.
How much air does the SE-20TN deliver at each pressure?
Air delivery is 2.35 m³/min at 0.8 MPa, 2.0 m³/min at 1.0 MPa and 1.70 m³/min at 1.3 MPa. Select the value for the required pressure when assessing simultaneous equipment consumption. The 180 L total receiver capacity buffers brief peaks without increasing continuous compressor output.
How should the electrical configuration be specified?
Specify the installation voltage, phase and frequency when requesting a quotation. The listed alternatives are 220 V single-phase, 380–415 V three-phase and 440–460 V three-phase, each with 50 or 60 Hz. Confirm the applicable motor and inverter configuration for the 15 kW order; one unit is configured for the selected supply.
Does the SE-20TN mobile package include a refrigerated dryer?
A refrigerated dryer is not included in this mobile compressor-and-receiver configuration. Specify drying and filtration according to the required outlet air quality. Confirm the cooling arrangement and treatment equipment in the quotation, and provide receiver and condensate drainage.
07 Request a Quotation for SE-20TN
Contact us to specify the YILUMA SE-20TN for your workshop air system. Send the required operating pressure, average and peak air consumption, site power supply and operating hours so that we can review the selected 15 kW configuration.
Include the required outlet air quality, installation conditions, order quantity and destination. We will confirm the equipment scope, technical configuration, delivery arrangements and quotation for your application.
Leave A Message