Huada 2.0 Series HD-160T 160kW Two-Stage PM VFD Screw Compressor

The German-technology two-stage compression airend compresses air in two stages, cutting specific energy consumption and lifting overall efficiency well above single-stage units.

The Huada 2.0 Series HD-90T delivers 19.8 m3/min at 0.8 MPa, a robust 90 kW two-stage PM VFD compressor engineered for continuous mid-duty industrial production.

The Huada 2.0 Series HD-55T 55 kW unit supplies up to 12.5 m3/min at 0.8 MPa, an ideal balance of capacity and footprint for growing workshops and light industrial lines.

The Huada 2.0 Series HD-132T provides 28.0 m3/min at 0.8 MPa, a heavy-duty 132 kW two-stage PM VFD compressor for large-scale and multi-machine centralized air stations.

The HD-75S is the flagship single-stage permanent-magnet variable-frequency screw compressor from the Huada INNOVATE 2.0 series, delivering a power output of 75 kW, a flow rate of 14 m³/min, and a pressure rating of 0.8 MPa. Equipped with an IE5 permanent-magnet motor, a German-engineered large-rotor main unit, and comprehensive IoT-based management capabilities, it provides efficient power supply for large-scale gas-utilization applications such as heavy-duty continuous production, wastewater treatment, and ship desulfurization.

Dobule stage compression structure, more energy saving. The core is the two-level compression of the injection screw air compressor in same power than single-stage compression of the injection screw air compressor and more 12%-23% air volume. 

The Huada HD0302(A) is a 2.2 kW (3 HP) dual-cylinder direct-connect air-cooled piston air compressor featuring a parallel twin-cylinder design where two 42 mm cylinders work in tandem to deliver a generous 0.20 m³/min displacement. Paired with a 30 L air receiver and 0.8 MPa (116 psi) working pressure, it can pressurize the tank from zero to rated pressure in approximately 90 seconds. The direct-coupled drive eliminates belt-slip losses, delivering superior mechanical efficiency over traditional belt-driven units. It is widely used in auto detailing and quick-repair shops for tire inflation, small bodywork pneumatic tool operation, finish carpentry nailer supply, wall spray painting, and other multi-tool simultaneous-operation scenarios.

Permanent magnet use high-srength NdFeB (neodymium iron boron) magnetic steel, high magnetic energyproduct and coercivity of NdFeB magnetic steel, make rare-earth permanent magnet motor have small size , lightweight , high ffient, good character etc, a series of advantages.