what are you looking for?
The HUADA HS3608 combines a 3 kW motor, single-stage belt-driven piston pump and 105 L air receiver in a wheeled workshop package. Its listed air delivery is 0.36 m³/min at 0.8 MPa, making it a practical option for workshop tools and maintenance tasks with matching air requirements.
Item NO.:
HS3608Product Origin:
Quanzhou, Fujian, ChinaColor:
Orange tank with black pump and belt guardProduct weight:
110 kgShipping Port:
XiamenLead Time:
Depends on configuration
The HS3608 is a single-stage piston compressor for workshops that need an air receiver and a pump in one movable package. The 3 kW motor drives a three-cylinder pump through a belt, with a listed air delivery of 0.36 m³/min at a working pressure of 0.8 MPa.
A 105 L horizontal receiver provides stored air for short demand peaks, while the wheels allow local repositioning around the work area. Select the compressor by the tools' required pressure, simultaneous air consumption and operating pattern; receiver capacity does not replace sufficient compressor output for sustained use.
1. Defined workshop duty point
The HS3608 provides a listed 0.36 m³/min at 0.8 MPa from a 3 kW motor, giving buyers a clear basis for matching the compressor to workshop equipment.
2. 105 L integrated air receiver
The horizontal tank stores compressed air and helps buffer brief increases in tool demand. It is included in the compressor's wheeled layout.
3. Three-cylinder single-stage pump
Three cylinders, each with a 65 mm bore, form the compression assembly. This is a single-stage piston design with a stated working pressure of 0.8 MPa.
4. Accessible belt-drive arrangement
The separate motor and pump are connected by a belt drive. The layout allows access for belt inspection and routine adjustment during scheduled service.
5. Air-cooled pump
The air-cooled configuration suits a ventilated workshop installation without a process cooling-water circuit. Keep the pump and belt-guard airflow paths unobstructed.
6. Wheeled horizontal layout
The tank-mounted assembly and wheels make short-distance repositioning practical on suitable workshop floors, while keeping the pump, motor and receiver together.
7. Visible pressure indication
The pressure gauge and control equipment are positioned around the receiver-mounted assembly, allowing operators to check pressure and access the operating controls.
HS3608 single-stage belt-driven piston compressor with a 105 L orange receiver and wheeled layout.
| Parameter | HS3608 |
|---|---|
| Model | HS3608 |
| Compressor type | Single-stage piston compressor |
| Motor power | 3 kW / 4 HP |
| Working pressure | 0.8 MPa |
| Listed air delivery | 0.36 m³/min |
| Air receiver capacity | 105 L |
| Cylinder bore × quantity | 65 mm × 3 |
| Drive arrangement | Belt drive |
| Cooling method | Air cooling |
| Packing dimensions (L × W × H) | 1230 × 480 × 870 mm |
| Gross weight | 110 kg |
| Power supply | Confirm voltage, phase and frequency when ordering |
The working pressure is 0.8 MPa. Packing dimensions are converted from 123 × 48 × 87 cm; the stated 110 kg is gross weight. Confirm the electrical configuration and operating duty for your application before ordering.
Tool demand: Provide the operating pressure and air consumption of each tool, how many tools run together and whether use is intermittent or sustained. Compare these requirements with the listed 0.36 m³/min output.
Work area and power: Allow a level position with ventilation around the pump and safe access to the controls. Confirm the power supply for the 3 kW motor and the electrical installation requirements.
Handling and connections: Use the 1230 × 480 × 870 mm packing size and 110 kg gross weight for transport planning. Confirm hose connections, pressure regulation and access for receiver drainage and service.
Air quality: Select moisture and oil-removal treatment to suit the tools or process. The 105 L receiver provides storage; it does not by itself establish dry or oil-free air quality.
| Before you order | What to confirm |
|---|---|
|
Quotation requirements |
Please provide your required operating pressure, average and peak air demand, power supply, order quantity and destination. |
|
Equipment scope |
The quotation specifies the selected compressor configuration and any receiver, dryer, filters or accessories included. |
|
Delivery and shipment |
Production lead time and shipping arrangements are quoted according to the selected configuration, quantity and destination. |
|
Technical documentation |
Please identify any documentation or destination-specific requirements needed for your purchasing process so that we can assess them for the selected configuration. |
|
Warranty and after-sales support |
Warranty coverage, service arrangements and spare-parts support are defined in the agreed quotation and order documents. |
Explore HUADA’s manufacturing facilities and request the technical documentation relevant to your selected configuration and destination.
View our factory
Review qualification documents
What is the specified working pressure of the HS3608?
The working pressure is 0.8 MPa, with an air delivery of 0.36 m³/min. Use this duty point when checking suitability for your tools.
Does the HS3608 include an air tank?
Yes. It includes a 105 L horizontal receiver in the wheeled assembly. The receiver helps meet short bursts of demand, but sustained air use must remain compatible with compressor output and the approved duty cycle.
Are 1230 × 480 × 870 mm and 110 kg the machine size and net weight?
These figures refer to packing dimensions and gross weight. Request the installation dimensions and handling information if you need to plan a fixed location or a restricted access route.
Can it supply spray equipment and pneumatic tools?
It can be considered when the equipment's pressure, airflow and operating cycle match the compressor. For spray work, also specify the required moisture and oil control so that suitable downstream treatment can be selected.
07 Request an HS3608 Quotation
Request an HS3608 quotation with your tool list, working pressure, simultaneous air demand, operating pattern, power supply, quantity and destination.
Let us know whether you need hoses, pressure regulation or air-treatment equipment so that the proposed package can be matched to your workshop.
Leave A Message
One Stage Belt Air-cooled Protable Air Compressor
The Huada HS1708 is a 1.5 kW single-stage belt-drive air-cooled piston air compressor featuring a heavy-duty cast iron cylinder design with a 62 L tank, 0.8 MPa working pressure, and 0.17 m³/min air delivery. Its compact, portable structure makes it ideal for light auto repair, tire inflation, woodworking nailers, light-duty spray painting, and everyday pneumatic tool applications.
3HP Belt Driven Piston Air Compressor For Painting
The Huada HS2508 is a 2.2 kW (3 HP) single-stage belt-drive air-cooled piston air compressor featuring a heavy-duty cast iron cylinder design with a large-capacity tank, 0.8 MPa working pressure, and 0.25 m³/min air delivery. With ample power and smooth low-vibration operation, it is purpose-built for automotive painting, wall spraying, decoration projects, and continuous operation of medium-to-heavy duty pneumatic tools.
Heavy Duty Belt Driven Type Air Compressor With 170L Tank
The Huada HS9008 is a 7.5 kW (10 HP) single-stage belt-drive air-cooled piston air compressor featuring a triple-cylinder parallel compression design with an extra-large 170 L tank, 0.8 MPa working pressure, and 0.9 m³/min rated air delivery. With ample power, abundant storage, and strong continuous air supply capability, it is purpose-built for factory production lines, large-scale auto repair shops, automated painting systems, and multi-station parallel air supply in heavy-duty industrial applications.
HS1208 Belt-driven Air-cooled Mobile Piston Air Compressor
The HS1208 is a single-stage compression belt-driven air compressor with air-cooling system; it features a 1.1 kW power rating, a 40 L air storage tank, and an exhaust capacity of 0.12 m³/min. With its compact design and high mobility, this unit is an ideal air source for small auto repair shops, painting facilities, woodworking workshops, and home-based small-scale operations.
HS4808 Dual-Cylinder Belt-Driven Air-Blowing Mobile Piston Compressor with Air Cooling
The HS4808 features a dual-cylinder 90 mm × 2 cast iron pump head paired with a 4 kW all-copper motor, offering an exhaust capacity of 0.48 m³/min and a large 120 L air reservoir, providing stable and cost-effective compressed air for small to medium-sized auto repair shops, metalworking facilities, and assembly lines.
HS15008 Heavy-duty three-cylinder belt-driven air compressor with air-cooling and mobile design
The HS15008 is a heavy-duty variant of the Huada single-stage air compressor with a water-cooled design; featuring a high power output of 11 kW, an oversized air storage tank of 265 L, and an exhaust capacity of 1.5 m³/min, it is specifically designed to provide a stable high-pressure air supply for factory production lines, large-scale automotive repair facilities, and engineering applications.
2.5HP Electric Direct Portable Air Compressor
Huada electric direct portable air compressor has many models,novel styles,beautiful appearance,compact structure,stable performance, convenient movement,etc.The wording can be selected according to the air demand of the work and different models can be selected.
160 kW SED+ Series Permanent Magnet Two-stage Variable Frequency Screw Air Compressor – Latest Design
The SED+ series 160 kW gear-driven dual-stage variable-frequency screw air compressor is a flagship product, combining 35% energy efficiency, variable-frequency vector control, dual-frequency noise reduction technology, and AirLink IoT-based comprehensive management—making it the premier air source solution for mining and heavy industry.
IPv6 network supported
English
français
Deutsch
русский
español
português
日本語
한국의
ไทย
中文
